Jowatherm® GROW marks a milestone in the development of hot melt adhesives based on renewable raw materials. Never before have cleaner and more efficient Jowat® products with such a high bio-based content been available. The modern hot melt adhesives save resources, not only due to the formulations with biological components, and facilitate recyclable bonds according to the German packaging law.
The sustainability of this adhesive has been verified and it has been awarded the DIN-tested biobased 20 – 50 % (8C183) certification mark. In addition to its high content of renewable raw materials, the adhesive provides further benefits that make it particularly environmentally friendly. The lower processing temperature facilitates a significant reduction in energy consumption, therefore helping in the conservation of resources and the optimisation of the working environment. Jowatherm® GROW 853.20 is also characterised by very low stringing and clean adhesive cut-off, which prevents the waste of adhesive and the soiling of packaging and machine parts.
The very high content of renewable raw materials makes this modern packaging hot melt adhesive ideal for companies that want to avoid the use of fossil-based raw materials as far as possible.
Jowatherm® GROW 853.22 provides a wide range of adhesion that facilitates a reliable Bonding of difficult surfaces. In addition, its high flexibility at low temperatures benefits deep-freeze applications.
| Viscosity [mPas] /|
| Open Assembly Time [s] /|
Temperature [°C] /
| Setting time [s] /|
data sheet (PDF)
|1300 ± 500 / 140||120 - 150||3 - 5 / 160||very short||Low processing temperatures possible. Very good adhesive cut-off, clean processing. Colourfast and good oxidation resistance. Bio-based content 33 % (cert. acc. ISO 16620-2:2019).||de en fr|
|3500 ± 700 / 140||140 - 180||10 ± 1 / 160||short||Very good adhesion. Very high flexibility of the bond at low temperatures, Good resistance to oxidation and Colour stability in the melt. Bio-based content > 45 %.||de en fr|
- Use of resins made from by-products of paper manufacturing and therefore do not compete with the food sector.
- Only pine wood from forests managed according to strict guidelines is used.
- The hot melt adhesives are manufactured by Jowat in its plant in Detmold, which is certified according to ISO 14001 (Environmental Management), ISO 50001 (Energy Management) and ISO 9001 (Quality Management).
- The adhesives of course fulfil the requirements of FDA 175.105 and EU 10/2011 for food packaging.
- Jowatherm® GROW 853.20: DIN certified biobased 20 – 50 % (8C183).
News & Articles
Hot melt adhesives are a small but essential component of modern packaging. An intense debate about the sustainability of packaging has not left…
Detmold, 06 May 2020 – Sustainability verified: The powerful bio-based hot melt adhesive supplied by Jowat, the global adhesives manufacturer…
Climate change and environmental protection have been a driving force for change in all areas of life, even before Fridays for Future. Jowat…
High energy efficiency, very clean processing and a high content of bio-based raw materials: Jowatherm® GROW packaging adhesives from Jowat, the…
With its brand new products from the Jowatherm® GROW series, the adhesives expert from Detmold will be marking a milestone in the development of…