Application Description

Flexible and strong, sacks and bags ensure a safe transport of goods such as free flowing bulk material. To protect the goods from mechanical stress and moisture, this packaging is usually manufactured from a composite material consisting of several layers of paper and plastic foils, paper and paper, or paper and aluminium foils. Special Jowacoll® dispersion adhesives used in manufacturing ensure, for instance, a fibre-free separation of the paper-plastic compound. In addition, the adhesives are characterised by superior feed properties, are easy to clean, provide a reliable, permanent adhesion to the different substrates, and meet the demands of food contact regulations.

Product Information


Base Viscosity [mPas] /
Temperature [°C]
Application Characteristics Download
data sheet (PDF)
Jowatherm-Reaktant® 601.00 PUR hot melt adhesive 34000 ± 6000 / 120 For bonding pretreated polyolefin foils, for instance for bonding sack bottoms of the AD-Plastik-SL series by Windmöller & Hölscher. Bonding of the extruded plastic foil and the bottom patch. After crosslinking, high heat resistance, good elasticity at low temperatures and good resistance to solvents. en fr

The products listed only represent a limited selection of the available product portfolio. Product availability might differ by region. The technical data, characteristics and field of application provided in the table outline the differences between the individual adhesives of the product portfolio. Our Application Technology Department and our Sales Representatives are on hand to provide advice and support you finding the best adhesive for your particular application.

Note: The information on this page is based on test results from our laboratories as well as on experience gained in the field, and does in no way constitute any guarantee of properties. Due to the wide range of different applications, substrates, and processing methods beyond our control, no liability may be derived from these indications nor from the information provided by our free technical advisory service. Customer trials under everyday conditions, testing for suitability at normal processing conditions, and appropriate fit-for-purpose testing are absolutely necessary. For the specifications as well as further information, please refer to the latest technical data sheets.