Special Jowacoll® dispersions or Jowatherm® hot melts can prevent packaging slipping in palletising. For instance, these adhesives can be applied as a coating directly onto the secondary packaging such as folding boxes. Alternatively, slip papers and cardboards may be coated inline or prior to the palletising process. After cooling down, the adhesive is still slightly tacky or dull. This ensures that the packages do not slip, while still being easy to separate. These adhesives facilitate higher loads on pallets, and do not leave any residues during depalletising.
| Viscosity [mPas] /|
data sheet (PDF)
|Jowat-Toptherm® 252.45||550 - 1.150||Pressure-sensitive hot melt adhesive on polyolefin basis. Good resistance to oxidation and colour stability in the melt.||de en fr|
|Jowatherm® 253.90||1210 / 160||Long open time, high hot tack, and good resistance to oxidation and colour stability in the melt.||de en fr|
|Jowatherm® 254.20||11600 / 160||Pressure-sensitive hot melt adhesive based on thermoplastic rubber.||de en fr|
|Jowat-Toptherm® 256.00||1460 ± 320 / 160||Hot melt adhesive with short setting time, extremely colourfast and excellent oxidation resistance. Excellent adhesion to difficult surfaces, good flexibility at low temperatures, minimal odour.||de en fr|
The products listed only represent a limited selection of the available product portfolio. Product availability might differ by region. The technical data, characteristics and field of application provided in the table outline the differences between the individual adhesives of the product portfolio. Our Application Technology Department and our Sales Representatives are on hand to provide advice and support you finding the best adhesive for your particular application.
Note: The information on this page is based on test results from our laboratories as well as on experience gained in the field, and does in no way constitute any guarantee of properties. Due to the wide range of different applications, substrates, and processing methods beyond our control, no liability may be derived from these indications nor from the information provided by our free technical advisory service. Customer trials under everyday conditions, testing for suitability at normal processing conditions, and appropriate fit-for-purpose testing are absolutely necessary. For the specifications as well as further information, please refer to the latest technical data sheets.