Suche

renewable raw materials remains transparent due to appropriate verification and certification systems such as ISCC PLUS, similar to the concept of green electricity [...] subject to hazard classification. Monomer-reduced PUR hot melt adhesives have a low content of monomeric diisocyanate (MDI) of less than 0.1 percent and are therefore

activated charcoal are neutral in odour and provide low fogging and emission values. Bonds made with the low VOC adhesives - Jowat-Toptherm® and Jowatherm-Reaktant®

is to find a balance between good flowing properties at low temperatures (in general, this means a low viscosity) and very high initial strength immediately after [...] Organization) standards regarding flame spread resistance and have wheel mark certification for applications in shipbuilding interiors. Therefore, they are ideally [...] role in this process. If the pressure during joining of e.g. sanded HPL is too low, the surface of the substrate is not wetted completely and the adhesive will

development of green adhesives are aspects that could impact human health. Low-pollutant and low-emission bonding solutions benefit consumers in the long term due to [...] manufacture of air filters. The adhesives used all comply with the different certification or standard requirements applicable to the specific component—be it in [...] “We are familiar with the requirements for the different standards and certifications and develop tailor-made adhesives,” emphasizes Maik Johanntoberens. “Building

therefore not exactly measurable due to dilution effects. However, appropriate certification and verification systems ensure the traceability of the renewable content [...] therefore always take into account the aspects of health effects. Lowpollutant and low-emission adhesive solutions mean considerable relief in this respect: When used [...] customer's environment, they are advantageous in the long term due to their low content of substances that pose a health risk, such as formaldehyde and plasticizers

reduction of VOC emissions is possible with modern PO adhesives like Jowat-Toptherm® 236.30. Adhesive formulations based on the new PO polymers only require low resin [...] the required tack. These adhesive formulations with low resin amounts lead to a substantial reduction in VOC emissions. Another clear improvement of impact resistance [...] spectrum of this adhesive covers for example highest surface quality and lowest VOC emission. The high impact resistance (Shore hardness) of Jowat-Toptherm® 236

and process times also at increased ambient temperatures and particularly low VOC and FOG values. A new PU dispersion from the Jowapur ® product group has been [...] fast crosslinking, high green strength and temperature resistance, as well as low VOC and Fogging values. Textile lamination Powerful PUR hot melt adhesives for [...] very high green strength and optimum compound strength, also when applied in low grammages, as well as excellent resistance, for instance against exposure to

also impresses due to benefits like a high green strength, low creep tendency, and advantageous VOC and FOG values. The adhesive can be applied by all established

confirmed by the present SKZ certificates. At the SKZ, this new PUR hot melt adhesive was also tested in combination with the new VOC-reduced Jowat Primer for a [...] product subject to hazard labelling restrictions and contained in most standard low-VOC primers on the market for PVC window profiles. This primer is the first in

classes A+ to C of the system “Émissions dans l’air interieur” refer to the total VOC emission (TVOC) plus limits for 10 individual substances, of which formaldehyde [...] substances from that chemical group and are generally characterised by very low emissions of TVOC. Jowat adhesives with reduced emissions are already free of [...] the manufacture of compound materials with significantly reduced emissions of VOC.” Adhesive with superior characteristics The total emission value of this product