Closures and straws must be easy to remove as well as reliable. And just like beverage cartons, they are available in a very wide variety. Consumers are therefore provided with a broad range of different flip and screw caps, as well as different designs of drinking straws to suit every taste. Adhesives play an important role in facilitating an appealing exterior appearance and easy handling of the packaging, cap, and straw. Due to the special challenges in the manufacturing process, they have to meet high requirements. The bonding operations of caps as well as straws are characterised by constantly increasing line speeds and a rising variety of different materials. Therefore, the adhesives have to ensure a high initial strengths as well as a good adhesion to different substrates with low application amounts. High resistances of the adhesive to ambient conditions like heat, low temperatures, and water are also necessary to ensure optimum and permanent adhesion after hot filling and subsequent cooling processes. Another requirement of paramount importance: compliance with food contact regulations.
Due to the multitude of straw designs and different surfaces of the foil wrap, the requirements for the adhesives used in this application are high. In addition, the adhesives have to be transparent, facilitating a clean application to ensure a fl awless appearance of the beverage carton. They also have to provide a secure and permanent bond that can resist high mechanical stress in downline packaging processes as well as during transport and handling by the consumer.
based on PO
| Viscosity [mPas] /|
| Setting time [s] /|
data sheet (PDF)
|Jowat-Toptherm® 256.00||1460 ± 320 / 160||short||Hot melt adhesive with short setting time, extremely colourfast and excellent oxidation resistance. Excellent adhesion to difficult surfaces, good flexibility at low temperatures, minimal odour.||de en fr|
|Jowat-Toptherm® 256.05||1460 / 160||short||Hot melt adhesive with short setting time, extremely colourfast and excellent oxidation resistance.||de en fr|
The products listed only represent a limited selection of the available product portfolio. Product availability might differ by region. The technical data, characteristics and field of application provided in the table outline the differences between the individual adhesives of the product portfolio. Our Application Technology Department and our Sales Representatives are on hand to provide advice and support you finding the best adhesive for your particular application.
Note: The information on this page is based on test results from our laboratories as well as on experience gained in the field, and does in no way constitute any guarantee of properties. Due to the wide range of different applications, substrates, and processing methods beyond our control, no liability may be derived from these indications nor from the information provided by our free technical advisory service. Customer trials under everyday conditions, testing for suitability at normal processing conditions, and appropriate fit-for-purpose testing are absolutely necessary. For the specifications as well as further information, please refer to the latest technical data sheets.
News & Articles
Whether a planned change of adhesive with the purpose of optimising the bonding process, or setting up an adhesive on a new production line –…
Beverages not only come in endless flavours, they are also supplied in many different packages, and especially the carton units for liquid beverages…