Application Description

In addition to providing anti slip properties, adhesives are also applied as spacers to protect goods against scratches and breaking during transport and storage. Jowat Toptherm® hot melts, for instance, are applied to the underside of roofing tiles and even glass as spacers. These adhesives provide a couple of special characteristics: a fast build up of initial strength, and high resistance to pressure, therefore, keeping their shape under the load of the tiles and glass on top. They adhere to the underside of the substrate without leaving any marks on the materials beneath them.

adhesives are also applied as spacers to protect goods against scratches and breaking during transport and storage

Product Information

-

Base Viscosity [mPas] /
Temperature [°C]
Characteristics Download
technical
data sheet (PDF)
Jowat-Toptherm® 845.10 PO hot melt adhesive 1400 ± 500 / 180 Good adhesion with low blocking tendency even at elevated temperatures; outstanding resistance to oxidation and colour stability in the melt. de en

The products listed only represent a limited selection of the available product portfolio. Product availability might differ by region. The technical data, characteristics and field of application provided in the table outline the differences between the individual adhesives of the product portfolio. Our Application Technology Department and our Sales Representatives are on hand to provide advice and support you finding the best adhesive for your particular application.

Note: The information on this page is based on test results from our laboratories as well as on experience gained in the field, and does in no way constitute any guarantee of properties. Due to the wide range of different applications, substrates, and processing methods beyond our control, no liability may be derived from these indications nor from the information provided by our free technical advisory service. Customer trials under everyday conditions, testing for suitability at normal processing conditions, and appropriate fit-for-purpose testing are absolutely necessary. For the specifications as well as further information, please refer to the latest technical data sheets.