One-component, moisture-curing PUR hot melt adhesives have been an established technology in the wood and furniture industry for several decades.
In general, conventional PUR hot melt adhesives have an excess of free monomer isocyanate (usually 4-4‘-diphenylmethane diisocyanate – short MDI) in the order of approx. 2 %. Since 2012, products containing isocyanate which have a free monomer isocyanate content of 0.1 % or more need to be labelled with the GHS hazard pictogram No. 8 (health hazard) and the relevant safety information (H and P statements). Adhesives with a free monomer isocyanate content below 0.1 % are not subject to labelling restrictions with regard to hazardous substances.
Jowat has already been working successfully on alternative technologies which are below the limit of 0.1 % since the beginning of the 21st century. The Jowatherm-Reaktant® MR (monomer-reduced) product group from Jowat provides several PUR hot melt adhesives for a wide range of applications which are not classified as hazardous substances.
Jowatherm-Reaktant® MR 609.93 for general flat lamination is the newest addition to this product group. The wide range of adhesion and the long open time of the adhesive facilitate a broad spectrum of applications: from laminating wood-based materials in furniture production, to manufacturing sandwich elements (e.g. for garage doors).
Jowatherm-Reaktant® MR 609.93 is an adhesive for the flat lamination of wood-based materials, as well as for manufacturing sandwich elements and for assembly operations. The product is equipped with the IMO certification ( EC Type Examination Certificates (Module B).
✓ No GHS labelling necessary*
✓ No P and H statements necessary*
(*according to EU regulation 1272/2008 and EU directive 2008/58/EC)