Technical textiles demonstrate their strengths in a variety of different industrial applications. For instance, in emery paper manufacturing velour are laminated to the reverse side of paper. The material compound is then rolled and stored for approx. 24 hours, after which it is die cut and packaged.
Generally applied by slot nozzle or roller systems, laminating adhesives promote highly efficient manufacturing processes and the properties of the end product. Emery paper is exposed to high mechanical stress and heat during use and therefore the adhesive has to facilitate a high compound strength. The separate layers must remain bonded together until all the abrasive has been worn down. Therefore, PUR hot melts which are characterized by very high initial strength and optimum adhesion to resinated papers are the adhesive of choice for laminating emery paper. These properties already play a crucial role immediately after laminating and ensure optimum resistance in downline processing.
Filter media are also manufactured from a laminated material compound and activated charcoal bonded to the textile. The laminated layers must promote the absorption capacity and the permeability of the product which is a critical demand for filter media. Thermoplastic PO and reactive PUR hot melts provide high compound strength with minimal adhesive application amounts.
|Base|| Viscosity [mPas] /|
data sheet (PDF)
|Jowatherm-Reaktant® 630.80||PUR Hot Melt Adhesive||8000 / 140||110 - 140||interior car panelling for instance hat racks, roof liners, door panelling etc.; compound materials||+||de en fr|
|Jowatherm-Reaktant® 639.50||PUR Hot Melt Adhesive||8000 ± 2000 / 120||ca. 120||For Bonding foam materials and textiles||+||de en|
|Jowatherm-Reaktant® GROW 631.20||Biobased Hot Melt Adhesive||8000 ± 2000 / 140||110 - 140||Laminating adhesive for manufacturing substrates for interior car trims, e.g. percel shelves, headliners, door trim, etc. Also for the assembly if composite materials in the textile industry.||de en|
|Jowatherm-Reaktant® MR 630.99||Monomer-Reduced PUR Hot Melt Adhesive||9000 ± 3000 / 110||100 - 130||Assembly of composite materials in the textile industry||de en|
|Jowatherm-Reaktant® 639.38||PUR Hot Melt Adhesive||14000 ± 2000 / 120||110 - 130||For manufacturing composite materials in the textile industry||de en|
The products listed only represent a limited selection of the available product portfolio. Product availability might differ by region. The technical data, characteristics and field of application provided in the table outline the differences between the individual adhesives of the product portfolio. Our Application Technology Department and our Sales Representatives are on hand to provide advice and support you finding the best adhesive for your particular application.
Note: The information on this page is based on test results from our laboratories as well as on experience gained in the field, and does in no way constitute any guarantee of properties. Due to the wide range of different applications, substrates, and processing methods beyond our control, no liability may be derived from these indications nor from the information provided by our free technical advisory service. Customer trials under everyday conditions, testing for suitability at normal processing conditions, and appropriate fit-for-purpose testing are necessary. For the specifications as well as further information, please refer to the latest technical data sheets.