our search for "adhesive"
returned 129 results.
Displaying results 21 to 30 of 129.
-
a thermoplastic PO hot melt adhesive that is characterised by an extremely high heat resistance and a very wide range of adhesion to materials like PP and NFPP [...] lamination for car interiors. One reason for the growing demand for this type of adhesive is the block-free, storage-stable precoating of reel material. Therefore, [...] steps. The final strength is reached shortly after the parts bonded with PO adhesive have cooled down. The continuously growing diversity of new matrix material
-
thermoplastic PO hot melt adhesive Jowat-Toptherm ® 238.20 is characterised by a long open time, high initial strength and good adhesion to materials based [...] precoating can be applied by an external supplier, in which case there is no more adhesive processing required during lamination. [...] precoating of decors, block-free Tested for the VACFLOW method Lamination adhesive for universal use incl. edgefolding Excellent oxidation and colour stability
-
Jowatherm ® 280.50 has become an established all-rounder on the market. The adhesive is renowned for good-natured processing characteristics and excellent bond [...] products in the field of „Jowatherm ® EVA hot melt adhesive”
-
linked to the entire supply chain, including the processed materials and adhesives. Adhesives for 3D laminating interior car parts have to provide superior performance [...] tant ® 642.00/08 has been developed to meet all demands with only one adhesive Consistency and standardisation. These objectives of the modular production [...] or spraying, laminated with a press or by vacuum deep-drawing – the same adhesive should be used in all processes and fulfil the different requirements.
-
difficult to bond with standard adhesive systems. Like in many other applications, reactive Polyurethane hot melt adhesives (PUR) provide major benefits for [...] difficult to bond, such as latex, viscose or gel foam. The PUR hot melt adhesive facilitates superior bonds and ensures long-term resistance. The bondline [...] according to IKEA, Oeko-Tex100, LGA and Blue Angel are met. In general, the adhesive can be applied on one or both surfaces, by roller or spraying. For an even
-
of polyolefin hot melt adhesives facilitates low application amounts. Zero bondline. The transparent appearance of the adhesive in the melt coupled with [...] cation amounts facilitate a virtually invisible adhesive joint (“zero-bondline”). Stability. PO hot melt adhesives have a superior thermal oxidation stability [...] For many years, the popularity of hot melt adhesives based on polyolefin (PO) has increasingly grown. Since their introduction
-
bondline, broad spectrum of adhesion, excellent thermal stability and high initial strength, paired with significantly reduced adhesive application amount for almost [...] determined by the quality of the edgebanded parts. Demands on the adhesives and the adhesive technology have increased dramatically since laser technology and [...] Jowat has developed a new unfilled PUR hot melt adhesive for highest requirements in edgebanding. Formulated with modern raw materials
-
percent of crosslinking agent Jowat ® 195.60 , the powerful two-component adhesive Jowacoll ® Five Star 102.49 facilitates very strong bondings. With [...] Five Star 102.49 shows its strength. Due to a very hard glue film, the adhesive withstands the high tensions and keeps the substrates perfectly in shape. [...] to EN 204 in N/mm2 Jowacoll ® Five Star 102.49 Av. value of adhesive strength in N/mm2 D4 1
-
flooring product that is free of plasticisers, not only the foil, but also the adhesive has to be free of plasticiser – Jowacoll ® ER 147.00 fulfils this
-
One-component, moisture-curing PUR hot melt adhesives have been an established technology in the wood and furniture industry for [...] for several decades. In general, conventional PUR hot melt adhesives have an excess of free monomer isocyanate (usually 4-4‘-diphenylmethane diisocyanate – [...] (health hazard) and the relevant safety information (H and P statements). Adhesives with a free monomer isocyanate content below 0.1 % are not subject to labelling
