Descripción de la aplicación

Los filtros para cabina de pasajeros son fabricados para proporcionar aire limpio al interior del vehículo, una variedad de materiales son pegados en varias capas en un proceso paso a paso. Los materiales del filtro ensamblado de esta manera protegen a los pasajeros de polvo, polen, moho, bacterias y olores y también contra los contaminantes gaseosos como el benceno o el ozono.
Cuando se considera la huella ecológica de un coche, estos filtros están desempeñando un papel importante.
Esto significa que el adhesivo utilizado no puede afectar de ninguna manera al rendimiento del filtro.

Información del Producto

-

Base Viscosity [mPas] /
Temperature [°C]
Processing
temperature [°C]
Open assembly time [s] /
Temperature [°C] /
mm bead
Application Download
technical
data sheet (PDF)
Jowat-Toptherm® 238.75 PO hot melt adhesive 8000 ± 1000 / 200 160 - 180 40 ± 5 / 170 / 2 Filter bonding. de en fr
Jowatherm-Reaktant® 614.18 PUR hot melt adhesive 5500 / 120 100 - 120 80 / 120 For bonding activated charcoal and for fleece lamination in the filter industry. de en fr

The products listed only represent a limited selection of the available product portfolio. Product availability might differ by region. The technical data, characteristics and field of application provided in the table outline the differences between the individual adhesives of the product portfolio. Our Application Technology Department and our Sales Representatives are on hand to provide advice and support you finding the best adhesive for your particular application.

Note: The information on this page is based on test results from our laboratories as well as on experience gained in the field, and does in no way constitute any guarantee of properties. Due to the wide range of different applications, substrates, and processing methods beyond our control, no liability may be derived from these indications nor from the information provided by our free technical advisory service. Customer trials under everyday conditions, testing for suitability at normal processing conditions, and appropriate fit-for-purpose testing are absolutely necessary. For the specifications as well as further information, please refer to the latest technical data sheets.