Votre recherche our "Jowat+are+"
a donné 92 résultats.
Montrer les résultats 1 de 10 à 92.
- « Première page
- ‹ Page Précédente
-
- 1
- 2
- 3
- 4
- ...
- Page suivante ›
- Dernière page »
-
several times for casting concrete parts. Jowat-Toptherm ® 233.10 is applied using hot melt guns which are either filled with a cartridge or supplied [...] minutes after bonding. Controlled ambient conditions are not necessary for bonding. The adhesive Jowat-Toptherm ® 233.10 is optimised for this particular [...] removal. The tried and proven PO-based hot melt adhesives from Jowat have been used for many years and are available – adapted to the established applicator systems
-
manufacture, carrier boards are coated with the most different surfaces. Frequently used materials apart from decor papers and veneers are thermoplastic foils, CPL [...] CPL, and HPL. The fields of application are vast: In the door and flooring industry multi-layer assemblies are manufactured in a single operation. From the core [...] environmental concerns and are unsuitable for many of the new materials. The dispersion adhesives of the Jowacoll ® series are among the efficient alternatives
-
excellence in close cooperation with our Solution Partners. Solution Partners are manufacturers of machinery, materials, substrates, application equipment, serving [...] daily life and in new projects – is born in cooperation of these players. Jowat Solution Partner Support is a global team that takes care of these partnerships
-
(monomer-reduced) product group from Jowat provides several PUR hot melt adhesives for a wide range of applications which are not classified as hazardous substances [...] The excellent characteristics of these products are well-known and the adhesives are well established in many fields of application due to their [...] surface du substrat, ce qui élargit considérablement la gamme d'adhérence. Jowat fournit des adhésifs thermofusibles réactifs à base de polyuréthane et de
-
it must be ensured that the different adhesives are compatible with each other as well as with the Jowat ® flushing agents and cleaners. [...] systems it should be ensured that PUR hot melt adhesives and the Jowat ® flushing agent are melted evenly, to prevent clogged hoses and nozzles due to an unwanted [...] system should be cleaned before downtimes. Jowat supplies a range of flushing agents and cleaners for that purpose. Jowat ® flushing agents push out the adhesive
-
started, it must be tested whether the adhesives are compatible with each other as well as with the Jowat ® flushing agents and cleaners. Especially in closed [...] systems it should be ensured that the PUR hot melt adhesive and the Jowat ® flushing agent are melted evenly, to prevent plugged hoses and nozzles due to an unwanted [...] shutdowns, etc.). Jowat supplies a range of flushing agents and cleaners for that purpose. Modern PUR hot melt adhesives for edgebanding are characterised by
-
General flow behaviour ©Jowat SE Jowat ® flushing agents purge the adhesive and stop the chemical reaction [...] application system is started, it must be ensured that the Jowat ® flushing agents and the adhesive used are compatible. To prevent plugged hoses or nozzles due [...] systems, it must be ensured that the PUR hot melt adhesive and the Jowat ® flushing agent are melted evenly. The primary task of a flushing agent is to push
-
adhesive changes. Jowat supplies a range of flushing agents and cleaners for that purpose. Jowat ® flushing agents [...] application system is started, it must be ensured that the Jowat ® flushing agent and the adhesive used are compatible. To prevent plugged hoses and nozzles, due [...] systems, it must be ensured that the PUR hot melt adhesive and the Jowat ® flushing agent are melted evenly.
-
vary from 0.03 μm to 5 μm. They are so small that they are not visible to the naked eye. Only very finely dispersed products are used in print finishing applications [...] Composition Dispersion adhesives are a mixture of two phases. Solid plastic particles are evenly dispersed in an aqueous carrier. Depending [...] use with warm or cold water, using Jowat ® Cleaner Concentrate 192.40. Already dried adhesive can be dissolved using Jowat ® Thinner 401.30. Please also
-
resins, urea formaldehyde resin glues (UF resins) are the most significant group of products. They are widely used in the general production of furniture due [...] high bond strengths. Jowat ® 950.50 is a UF resin for hot and cold curing, especially for classic [...] Jowat ® 950.20 is an UF resin for bonding veneer, decor papers and pressure
- « Première page
- ‹ Page Précédente
-
- 1
- 2
- 3
- 4
- ...
- Page suivante ›
- Dernière page »
