Description de l'application

Flexibles et solides, les sacs et les sachets assurent un transport sûr des marchandises en vrac. Pour protéger les produits transportés de l'humidité et des chocs, cet emballage est habituellement constitué de papier et film plastique, papier et papier, ou papier et film aluminium. Les dispersions spécifiques Jowacoll® utilisées dans la fabrication garantissent, par exemple, une séparation du complexe papier-plastique sans défibrage. En outre, les adhésifs se caractérisent par une excellente utilisation avec les matériels d'alimentation des machines, sont faciles à nettoyer, offrent une adhésion fiable et permanente aux différents substrats et répondent aux exigences de la réglementation en matière de contact alimentaire.

Nouvelles et articles

Téléchargements

Autres applications

Autres applications dans le domaine de „Emballage flexible”

Informations sur le produit

-

Base Viscosity [mPas] /
Temperature [°C]
Application Characteristics Download
technical
data sheet (PDF)
Jowatherm-Reaktant® 601.00 PUR hot melt adhesive 34000 ± 6000 / 120 For bonding pretreated polyolefin foils, for instance for bonding sack bottoms of the AD-Plastik-SL series by Windmöller & Hölscher. Bonding of the extruded plastic foil and the bottom patch. After crosslinking, high heat resistance, good elasticity at low temperatures and good resistance to solvents. en fr
Jowatherm-Reaktant® 601.01 PUR hot melt adhesive 52500 ± 7500 / 140 For bonding pretreated polyolefin foils, for instance for bonding sack bottoms of the AD-Plastik-SL series by Windmöller & Hölscher. After crosslinking, high heat resistance, good elasticity at low temperatures and good resistance to solvents. de en
Jowatherm-Reaktant® 601.02 PUR hot melt adhesive 25000 ± 5000 / 140 For bonding pretreated polyolefin foils, for instance for bonding sack bottoms of the AD-Plastik-SL series by Windmöller & Hölscher. After crosslinking, high heat resistance, good elasticity at low temperatures and good resistance to solvents. de en fr
Jowatherm-Reaktant® 601.03 PUR hot melt adhesive 9800 ± 2200 / 140 For bonding pretreated polyolefin foils, for instance for bonding sack bottoms of the AD-Plastik-SL series by Windmöller & Hölscher. After crosslinking, high heat resistance, good elasticity at low temperatures and good resistance to solvents. de en fr
Jowatherm-Reaktant® 601.05 PUR hot melt adhesive 2500 ± 500 / 120 For bonding pretreated polyolefin foils, for instance for bonding sack bottoms of the AD-Plastik-SL series by Windmöller & Hölscher. After crosslinking, high heat resistance, good elasticity at low temperatures and good resistance to solvents.Long and high surface tack. de en fr
Jowatherm-Reaktant® 601.06 PUR hot melt adhesive 20000 ± 5000 / 120 For bonding pretreated polyolefin foils, for instance for bonding sack bottoms of the AD-Plastik-SL series by Windmöller & Hölscher. Medium open time and high initial adhesion. After crosslinking, very high strength of the bond, excellent heat resistance and very good resistance to low temperatures. de en fr

The products listed only represent a limited selection of the available product portfolio. Product availability might differ by region. The technical data, characteristics and field of application provided in the table outline the differences between the individual adhesives of the product portfolio. Our Application Technology Department and our Sales Representatives are on hand to provide advice and support you finding the best adhesive for your particular application.

Note: The information on this page is based on test results from our laboratories as well as on experience gained in the field, and does in no way constitute any guarantee of properties. Due to the wide range of different applications, substrates, and processing methods beyond our control, no liability may be derived from these indications nor from the information provided by our free technical advisory service. Customer trials under everyday conditions, testing for suitability at normal processing conditions, and appropriate fit-for-purpose testing are absolutely necessary. For the specifications as well as further information, please refer to the latest technical data sheets.