Recherche

Flushing agent residues can be removed mechanically when cold. Cured residues of PUR hot melt adhesive in the roller pan and on the roller can be removed mechanically [...] all grease and flushing agent residues. Roller Pan Soiled application rollers can lead to an uneven and possibly insufficient adhesive application on the substrate [...] mechanically. This can be done using a soft brass brush and air from a pressurised air gun (suitable protective equipment must be used). The mechanical cleaning must

The adhesives must be flexible enough to withstand mechanical stresses which can occur during installation and operation. Automotive air filters, for example [...] characterized by good processing stability, high adhesion to different materials and can be used in automated manufacturing processes. The formulation provides an optimum [...] article is published in the magazine "F & S 05 | 2024" in German language. You can download the original article down below.

not only can Kjörís reliably seal the multipacks of popular ice cream flavours like “Vanillu Flaug” (roughly “Vanilla Flyer” in English), but can also increase [...] is mainly the low temperatures during the storage of these sweet treats that can really put the adhesive to the test – temperatures as low as -40 °C are not [...] products, the range also includes sauces, chocolate and other confectionary that can be used as toppings for their creamy soft serve ice cream. Be it for independent

temperature from 90°C to 120°C facilitates energy-efficient applications and can save material. Additionally, it is gentle on textiles and preserves their f [...] the strict requirements for environmental compatibility and human health and can therefore be used for manufacturing textiles certified according to OEKO-TEX

Jowatac ® 471.64 can be applied by spraying and has good initial strength. Surface tack disappears after a relatively short time already. It can be applied to