Votre recherche our "time"
a donné 9 résultats.
Montrer les résultats 1 de 9 à 9.
-
possible functional layers and to the finished surface, operations and Pressing times can thus be reduced. Multi-layer modular assemblies have become established [...] absorbent. High temperatures and low humidity reduce the assembly and Pressing times. The minimum film-forming temperature (in short MFFT) is the lowest temperature
-
drain valve. The flushing and cleaning procedure should be repeated several times. It is recommended to clean the system again after several days or weeks. Residues
-
application system to standard operation mode and repeat the procedure up to three times depending on the degree of soiling.
-
drain valve. The flushing and cleaning procedure should be repeated several times. It is recommended to clean the system again after several days or weeks. Residues
-
bottles which were opened and have been in use have to be re-closed at all times to prevent any reactions with humidity.
-
hygiene training as part of their induction within an appropriate period of time. Smoking as well as eating and drinking should only be permitted in designated
-
flat bonding, offer the choice of assembly times between 10 and 60 minutes, and facilitate an assembly-pressing time ratio of 1:1 that has never before been achieved [...] Max. assembly time [min] / Temperature [°C] Min. pressing time [min] / Temperature [...] obsolete. Optimised assembly-pressing time ratio The adhesives of the Jowapur ® 681.xx series have undergone
-
Setting time [s] / Temperature [°C] Open assembly time [min] / Temperature
-
its emissions in the long term. Because that procedure is very expensive and time-consuming, the in-can method has become established for measuring the VOC emissions
