The purpose of release agents is to ensure that permanent bonds are formed only where they should be. Due to the excellent release effect of Jowat® 900.00, processors can prevent undesired adhesive residues on machine parts. The characteristics of the release agent facilitate efficient processes, reduced maintenance and clean processing. Jowat® 900.00 is used primarily as a release agent for adhesives based on PVAc dispersion, UF, MUF and PRF.
In addition, the formulation contains an anticorrosive additive which protects the materials and the machine parts during use. Jowat® 900.00 is non-hazardous and therefore does not bear any GHS hazard pictograms on the label. For best results, the surfaces to be coated with Jowat® 900.00 should be dry and be free of dust, oil and grease.
Release agent for adhesives based on PVAc dispersion, UF, MUF and PRF.
- For cold and hot pressing
- For single- and multi-daylight presses, fast-cycle presses, mold presses, and veneering presses
- For machine parts (e.g. pressure rollers, platens)