Descrizione

Pleated filter media are made from a wide variety of materials, such as for instance paper or different nonwoven fabrics. Thermoplastic adhesives for filters from Jowat for pleating and frame bonding are characterised by a broad spectrum of adhesion. In addition, they also function as a sealant, give the filters stability and facilitate highly reliable processes. Due to the special characteristics of these adhesives, the finished filters keep their form throughout their life cycle even while the compound is exposed to mechanical stress e.g. during installation or to high temperatures of over 180 °C. Special polyolefin hot melts can be used for pleating as well as for filter frame bonding and meet all necessary requirements.

Jowat-Toptherm® adhesives provide structural properties due to their superior bonding characteristics on papers and fleece materials, and also the excellent mechanical resistance when used for pleating or frame assembly operations. They get the filters in shape and always remain flexible over the entire life of the filter. They do not undergo deformation, even when the material compound is exposed to mechanical forces or high temperatures.

Pleating

Engine intake air filters are good examples to explain the importance of these pleated filters. They need to guarantee that the high-performance components are protected against potential damages from rust, pollen, dust, tire abrasion, sand, and other dirt, allowing the engine to operate with effi-cient combustion and without damage. The pleating in this case functions to enlarge the surface while taking up only a small space.
Since the filter materials and also the manufacturing methods differ widely, the adhesives utilized for the pleating process demand special properties: an open time adapted to the line speed, a high initial or green strength / handling stability and a high temperature resistance
Filter papers soaked with phenolic resin undergo thermal processes after pleating which may expose them to temperatures up to 180 °C, and of course, the adhesives must withstand this stress.

Frame bonding

The engine compartments of today’s cars are becoming more and more compact, and in consequence allow only very limited space for the air filters. When these are exchanged in the course of maintenance, the filter elements are heavily deformed, which then also requires superior resistance of the bonded frames. The adhesive, specifically the adhesive joint, may not fail, and the filter pockets must remain sealed. Additionally, the performance of the filter element may not be diminished in any way by the adhesive. 

Informazioni sul prodotto

-

Base Viscosity [mPas] /
Temperature [°C]
Processing
Temperature [°C]
Open Time [s] /
Temperature [°C] /
mm Bead
Application Download
technical
data sheet (PDF)
Jowatherm® 262.25 EVA Hot Melt Adhesive 3400 ± 600 / 180 140 - 180 10 ± 2 / 160 / 2 Assembly hot melt for manufacturing industrial filters. de en fr
Jowat-Toptherm® 263.15 PO Hot Melt Adhesive 28000 ± 5000 / 190 180 - 200 18 ± 2 / 190 / 2 Hot melt adhesive for filter bonding and coating. de en fr
Jowat-Toptherm® 264.50 PO Hot Melt Adhesive 8000 ± 2000 / 190 170 - 190 35 ± 3 / 180 / 2 Filter bonding. de en
Jowat-Toptherm® 262.95 PO Hot Melt Adhesive 13000 ± 3000 / 160 140 - 160 45 ± 5 / 150 / 2 Filter industry. de en
Jowat-Toptherm® 263.05 PO Hot Melt Adhesive 26000 ± 6000 / 190 180 - 200 20 ± 3 / 180 / 2 Hot melt adhesive for filter bonding and coating. de en fr
Jowat-Toptherm® 263.17 PO Hot Melt Adhesive 36000 ± 5000 / 200 180 - 200 22 ± 2 / 190 / 2 Hot melt adhesive for filter bonding and coating. de en

I prodotti elencati rappresentano solo una selezione limitata del portafoglio di prodotti disponibile. La disponibilità del prodotto potrebbe variare in base alla regione. I dati tecnici, le caratteristiche e il campo di applicazione riportati nella tabella delineano le differenze tra i singoli adesivi del portafoglio prodotti. Il nostro dipartimento di tecnologia applicativa ei nostri rappresentanti di vendita sono a disposizione per fornire consulenza e supportarti nella ricerca dell'adesivo migliore per la tua particolare applicazione.

Nota: le informazioni contenute in questa pagina si basano sui risultati dei test dei nostri laboratori nonché sull'esperienza acquisita sul campo e non costituiscono in alcun modo alcuna garanzia di proprietà. A causa della vasta gamma di diverse applicazioni, substrati e metodi di lavorazione al di fuori del nostro controllo, nessuna responsabilità può essere derivata da queste indicazioni né dalle informazioni fornite dal nostro servizio di consulenza tecnica gratuito. Sono assolutamente necessari test dei clienti in condizioni quotidiane, test di idoneità alle normali condizioni di lavorazione e test adeguati allo scopo. Per le specifiche e ulteriori informazioni fare riferimento alle ultime schede tecniche.

Notizie ed articoli

Topnews
Filtro
Automotive e trasporti
Articoli professionali

Air filters in vehicles and buildings are high-performance products. They ensure a constant supply of fresh and especially clean air. Filter media are…

Downloads

Adhesive Portfolio for the Filter Industry.PDF

Ulteriori applicazioni

Ulteriori applicazioni nei settori „Industria del filtri”