Środek czyszczący

In addition to a wide range of bonding solutions from different adhesive systems, Jowat also provides special service products. The subsequent cleaning should be just as regular and natural as the adhesive application itself. Jowat recommends a combination of flushing processes and cleaning by hand, although the exact procedures depend on the type of machine and adhesive in use. To achieve optimum results in each case, Jowat offers the perfect cleaning products and operationg instructions for each of ist products.

Seria produktów, właściwości i zastosowanie

Jowat® Środek separujący

Characteristics: Jowat draws on expertise not only in bonding, but also in breaking an adhesive joint. The Jowat portfolio also provides several special release agents for the wood industry, which facilitate an easy removal of dried adhesive remnants from treated parts.
Application: Coating of machine parts used for bonding, pressing, laminating and lacquering.


Jowat® Środek czyszczący

Characteristics: Surface cleaning agents based on solvents and bio cleaner on aqueous surfactants.
Application: Cold cleaners for adhesive and lacquer residues.


Jowat® Rozcieńczalnik

Characteristics: A special additive in the formulation prevents the chemical reaction of the PUR hot melt adhesive during flushing.
Application: For flushing out applicator systems used for PUR hot melt adhesives.


Jowat® Środek do czyszczenia rąk

Characteristics: Wash-active substances. Excellent cleaning effect, economical, hygienic, mild and skin-friendly, renew protective fat content of the skin, free from silicone and terpene hydrocarbons, no abrasive additives which might clog drains and pipes. Pleasant smell and clinically tested.
Application: Remove adhesive residues within seconds mild and gently from the Skin.


Wskazówki i porady

Czyszczenie i wymiana kleju PUR
Podręcznik Jowat ze wskazówkami i poradnikiem - pomagamy znaleźć rozwiązanie problemów związanych z czyszczeniem PUR
Cleaning of PUR Edgebanders
Jowat Manual with Tips and How To Video-Guide - find the solution to your Edgebander cleaning problems and get some helpful tips for adhesive changes.
Cleaning of Slot Nozzles and Applicator Heads
Find the solution to your PUR Slot nozzle cleaning problems and get practical tips for cleaning applicator heads! Jowat Manual with Tips and How To Guide.
Cleaning and Adhesive Change of Wrapping Units
Jowat Manual with Tips and How To Guide for a successful cleaning process of wrapping units. Find useful tips for changing from EVA to PO hot melt adhesive.

Welche Kategorien interessieren Sie?

Suchen Sie bestimmte Newstypen?

Topnews
Stories

Jowat's Advice: Alternative adhesives

To maintain quality when changing to a new adhesive, it is important to follow some critical steps during the process. Make the change easily with…

Topnews
Stories

Jowat's Advice: Clean job

Thermal exposure can cause industrial adhesives to burn onto system components and behave like grease on a grill within the machine: over time, a…