Wyszukiwanie

apply dots or beads of hot adhesive onto the surfaces to be bonded. This often has an undesired side effect, where the applied adhesive is pulling behind it a fine [...] temperature. It determines the viscosity of the adhesive and largely influences the cut-off of the adhesive at the nozzle. The temperature at the applicator [...] consistency of the adhesive flow—possibly a cause of irregular stringing. Ambient conditions can also have an effect on the temperature of the adhesive. Open doors

g of the adhesive. When starting up again, remove the container with flushing agent after heating, insert the adhesive, and make sure the adhesive extrudes [...] reproducible adhesive application. The cleaning effort varies depending on the application system and unit, and depends largely on the type of adhesive used. It [...] downtimes and adhesive changes. Jowat supplies a range of flushing agents and cleaners for that purpose. Jowat ® flushing agents purge the adhesive from the system

Adhesives A fully functional adhesive application system and melter are of major importance for a smooth and reproducible adhesive application. The cleaning effort [...] system and unit, and depends largely on the type of adhesive used. If the old and the new hot melt adhesive have different chemical bases, it is necessary to [...] it will only purge the adhesive in the centre of the hose. Under those circumstances, it will not be possible to remove all the adhesive. To find out the viscosity

Description Jowat ® Flushing Agents Purge Adhesive Remnants from Hoses, Melter and Application Nozzles A fully functional adhesive application system and melting unit [...] reproducible adhesive application. The cleaning effort varies depending on the application system and unit, and depends largely on the type of adhesive used. If [...] recommended when the adhesive is changed. Melter and Hoses The primary task of a flushing agent is to physically push out the adhesive from the hoses and the

of adhesion make this adhesive a solid alternative to PUR hot melt systems. Jowat-Toptherm ® 237.50 is the newest PO hot melt adhesive in its range with a completely [...] Jowat-Toptherm ® 237.50 is a new PO hot melt adhesive which impresses in applications with special requirements in terms of bonding performance and high aesthetic [...] filler-free formulation. This increases yield and facilitates colorless adhesive bondlines that are barely visible, especially in applications with dark decor