Opis aplikacji
Okleinowanie z użyciem klejów topliwych
Przez dziesięciolecia oklejanie krawędzi płyt drewnopochodnych różnymi obrzeżami była uznaną praktyką w przemyśle meblarskim. Wymogi jakościowe dotyczące atrakcyjności wizualnej, postępu technicznego w inżynierii, a także niemal nieograniczonej różnorodności materiałów przeznaczonych do przetworzenia - wszystkie te czynniki stanowią szczególne wyzwania dla technologii klejenia. W nowoczesnej, wysokiej jakości produkcji mebli, jakość obrzeża staje się coraz ważniejszym kryterium oceny jakości całej pozycji mebli. Klient końcowy wymaga spoiny, która jest mało widoczna i doskonała.
Niewątpliwie wskutek opracowania nowoczesnych metod produkcji, takich jak technologie laserowe czy technologie HotAir, przemysł od dłuższego czasu opowiada o tak zwanej "zerowej spoinie".
Informacje o produkcie
- EVA hot melt adhesive
- PO hot melt adhesive
- PUR hot melt adhesive
- PUR hot melt adhesive (non-hazardous)
EVA hot melt adhesive
Base | Viscosity [mPas] / Temperature [°C] | Processing Temperature [°C] | Softening Range (Kofler) [°C] | Density [g/cm³] / Temperature [°C] | Appearance |
Download technical data sheet (PDF) | |
---|---|---|---|---|---|---|---|
Jowatherm® 280.00 | EVA Hot Melt Adhesive | 35500 ± 11750 / 200 | 180 - 200 | 90 ± 5 | 1,03 ± 0,03 / 20 | yellow translucent | de en fr |
Jowatherm® 280.10/11 | EVA Hot Melt Adhesive | 165000 ± 25000 / 200 | 190 - 210 | 100 ± 5 | 1,03 ± 0,02 / 20 | 0 = light beige; 1 = white | de en fr |
Jowatherm® 280.30/31 | EVA Hot Melt Adhesive | 50500 ± 12500 / 200 | 180 - 200 | 90 ± 5 | 1,03 ± 0,03 / 20 | 0 = yellow translucent; 1 = white | de en fr |
Jowatherm® 280.50/51 | EVA Hot Melt Adhesive | 85000 ± 13000 / 200 | 180 - 200 | 95 ± 5 | 1,14 ± 0,02 / 20 | 0 = light beige; 1 = white | de en fr |
Jowatherm® 280.58 | EVA Hot Melt Adhesive | 85000 ± 10000 / 200 | 180 - 200 | 95 ± 5 | 1,00 ± 0,02 / 20 | colourless | de en fr |
Jowatherm® 284.70/71/72/73 | EVA Hot Melt Adhesive | 85000 ± 20000 / 200 | 190 - 210 | 90 ± 5 | 1,52 ± 0,03 / 20 | 0 = beige; 1 = white; 2 = brown; 3 = black | de en fr |
Jowatherm® 286.30/31 | EVA Hot Melt Adhesive | 50000 ± 15000 / 200 | 180 - 200 | 90 ± 5 | 1,05 ± 0,05 / 20 | 0 = yellow translucent; 1 = white | de en fr |
Jowatherm® 286.60/61 | EVA Hot Melt Adhesive | 62500 ± 12500 / 200 | 180 - 200 | 95 ± 5 | 1,30 ± 0,05 / 20 | 0 = beige; 1 = white; 2 = brown; 3 = black | de en fr |
Jowatherm® 288.60/61/62/63 | EVA Hot Melt Adhesive | 90000 ± 20000 / 200 | 180 - 200 | 95 ± 5 | 1,33 ± 0,05 / 20 | 0 = beige; 1 = white; 2 = brown; 3 = black | de en fr |
PO hot melt adhesive
Base | Viscosity [mPas] / Temperature [°C] | Processing Temperature [°C] | Softening Range (Kofler) [°C] | Density [g/cm³] / Temperature [°C] | Appearance |
Download technical data sheet (PDF) | |
---|---|---|---|---|---|---|---|
Jowat-Toptherm® 227.30 | PO Hot Melt Adhesive | 100750 ± 20000 / 200 | 190 - 210 | 135 ± 5 | 1,10 ± 0,05 / 20 | beige | de en fr |
Jowat-Toptherm® 237.10/11 | PO Hot Melt Adhesive | 85500 ± 14000 / 200 | 180 - 200 | 130 ± 5 | 1,10 ± 0,02 / 20 | 0 = beige, 1 = white | de en fr |
Jowat-Toptherm® 237.70/71/72/73 | PO Hot Melt Adhesive | 83000 ± 10000 / 200 | 170 - 200 | 130 ± 5 | 1,23 ± 0,05 / 20 | 0 = light beige; 1 = white, 2 = brown, 3 = black | de en fr |
Jowat-Toptherm® 221.00 | PO Hot Melt Adhesive | 23200 ± 2200 / 200 | 115 ± 5 | 0,90 ± 0,03 / 20 | yellow | de en fr | |
Jowat-Toptherm® 237.50 | PO Hot Melt Adhesive | approx. 95.000 / 140 | 190 - 210 | approx. 125 | approx. 0,9 | colourless | de en fr |
PUR hot melt adhesive
Base | Viscosity [mPas] / Temperature [°C] | Processing Temperature [°C] | Softening Range (Kofler) [°C] | Density [g/cm³] / Temperature [°C] | Appearance |
Download technical data sheet (PDF) | |
---|---|---|---|---|---|---|---|
Jowatherm-Reaktant® 607.40/41/45 | PUR Hot Melt Adhesive | 77500 ± 22500 / 140 | 130 - 150 | 70 ± 5 | 1,35 ± 0,05 / 23 | 0 = beige; 1 = white; 5 = pure white | de en fr |
Jowatherm-Reaktant® 607.50/51 | PUR Hot Melt Adhesive | 75000 ± 25000 / 140 | 130 - 150 | 70 ± 5 | 1,35 ± 0,05 / 23 | 0 = beige; 1 = white | de en fr |
Jowatherm-Reaktant® 607.60/61 | PUR Hot Melt Adhesive | 75000 ± 25000 / 140 | 140 - 160 | 80 ± 5 | 1,32 ± 0,05 / 20 | 0 = beige; 1 = white | de en fr |
Jowatherm-Reaktant® 608.00/01 | PUR Hot Melt Adhesive | 90000 ± 20000 / 120; 42500 ± 7500 / 140 | 100 - 120 | 65 ± 5 | 1,1 ± 0,1 / 23 | 0 = yellowish opaque; 1 = white | de en fr |
PUR hot melt adhesive (non-hazardous)
Base | Viscosity [mPas] / Temperature [°C] | Processing Temperature [°C] | Softening Range (Kofler) [°C] | Density [g/cm³] / Temperature [°C] | Appearance |
Download technical data sheet (PDF) | |
---|---|---|---|---|---|---|---|
Jowatherm-Reaktant® MR 607.90/91 | Monomer-Reduced PUR Hot Melt Adhesive | 75000 ± 25000 / 140 | 120 - 140 | 70 ± 5 | 1,28 ± 0,08 | 0 = beige; 1 = white | de en fr |
Jowatherm-Reaktant® MR 608.90 | Monomer-Reduced PUR Hot Melt Adhesive | 60000 ± 20000 / 140 | 120 - 140 | 70 ± 5 | 1,1 ± 0,1 | 0 = yellow opaque; 1 = white | de en fr |
Jowatherm-Reaktant® MR 606.90 | Monomer-Reduced PUR Hot Melt Adhesive | 95000 ± 25000 / 150 | 120 - 140 | 1,1 ± 0,1 / 20 | de en fr |
Wymienione artykuły stanowią jedynie część dostępnego portfolio produktów. Dostępność produktów może się różnić w zależności od regionu. Dane techniczne, cechy i zakres zastosowania podane w tabeli przedstawiają różnice między poszczególnymi klejami z portfolio produktów. Nasz Dział Technologii nasi Przedstawiciele Handlowi służą radą oraz wsparciem w znalezieniu najlepszego kleju do konkretnego zastosowania.
Uwaga: Informacje na stronie oparte są na wynikach badań z naszych laboratoriów, a także na doświadczeniach zdobytych w tej dziedzinie i w żaden sposób nie stanowią gwarancji właściwości produktu. Ze względu na szeroką gamę zastosowań, podłoży i metod przetwarzania, na które nie mamy wpływu, nasza odpowiedzialność nie może wynikać z przedłożonych wskazań ani bezpłatnej usługi doradztwa technicznego. Próby przydatności u klienta w codziennych warunkach przechowywania oraz przetwarzania kleju oraz odpowiednie pomiary dla dopasowania najlepszego produktu są absolutnie konieczne. Dane techniczne oraz dodatkowe informacje znajdują się w najnowszych kartach technicznych.
Wiadomości i artykuły
Economical processes due to high initial strength, Good bonding strengths and broad spectrum of adhesion.
Wondering how much the edgeband adhesive for a kitchen costs?
Actually less than you might think!
Jowat develops new monomer-reduced PUR hotmelt adhesive for edgebanding without GHS labelling.
Jowat, the adhesives specialist from Detmold, to showcase first PUR hot melt granules for edgebanding with hazard-free labelling in world premiere…
Jowat now supplies the worldwide first monomer-reduced PUR edgebanding adhesive available as granules, Jowatherm-Reaktant® MR 607.90.
Introduced in the 1950s, particleboard has been one of the most important innovations in the furniture manufacturing industry. To this day,…
Porady aplikacyjne
Directions for use
PUR hot melt adhesives can be processed on throughfeed lines at different feed speeds, as well as on roller and nozzle applicators. All parts of the melting and application units coming into contact with the adhesive should have a non-stick coating to prevent possible catalytic reactions due to metal contact. A non-stick coating will also facilitate a considerably easier cleaning.
The melting and application units should be equipped with a precise temperature control to prevent local overheating and unwanted secondary reactions. Heating the adhesive to a temperature above the recommended processing temperature will usually lead to a fast increase in viscosity of the melt due to a so-called thermal crosslinking reaction in the adhesive (the allophanate reaction), which is triggered by heat and does not need moisture.
Cleaning
If necessary, flush out hot melt remnants from the melt and applicator units with flushing agent Jowat® 930.94 (red). Crosslinked, solid material has to be dissolved with cleaner Jowat® 930.60 (please test for suitability before use).
See our Jowat Manual with Tips and Video How To Guide for cleaning problems and helpful tips for adhesive changes