Suche

nossa pesquisa por "time" retornou 138 resultados.

  1. Laminated timber assembly: The winner in open and pressing time – now it stands at about 1:1

    Until now, the ratio between open and pressing time was around 1:3 to 1:4. As a result, the time remaining for adhesive application on large-surface laminated [...] process step crucial for the quality of the end product, was very limited. The time in the press for setting/pressing, however, was comparatively long, with the
    https://www.jowat.com/pt-BR/detalhe-da-redacao/laminated-timber-assembly-the-winner-in-open-and-pressing-time-now-it-stands-at-about-11/

  2. Innovations for the Ligna 2013: Attractive adhesives – powerful, efficient, ecological!

    adhesion spectrum, high initial strength, and which at the same time have a short crosslinking time. The new Jowatherm-Reaktant® 604.20 is the result of a consequent [...] n, the adhesives should offer long processing and short pressing times. The long open time of the new Jowapur® 686.70 makes this adhesive the product of choice [...] large structural components are manufactured. The relation of open time to pressing time is practically 1:1 when the processing parameters are observed, with
    https://www.jowat.com/pt-BR/detalhe-da-redacao/innovations-for-the-ligna-2013-attractive-adhesives-powerful-efficient-ecological/

  3. Insight Into the Jowat History: The Turbulent Post-War Years

    Time and again throughout its history, Jowat SE has proven that it holds together as a family business even in difficult times, that it is up to the most diverse [...] mind to illustrate the ingenuity of the adhesive manufacturer. A stitch in time The story begins in the post-war period. A great sense of relief was sweeping [...] and set them off particularly beautifully, were very much in demand at the time – in keeping with Parisian chic. The only downside of the fashionable celebratory
    https://www.jowat.com/pt-BR/detalhe-da-redacao/1947-the-turbulent-post-war-years/

  4. Powerful PUR Hot Melt Adhesive Sets New Benchmarks in Flat Lamination

    ktant ® 609.60 is the unusually long open time. It provides maximum flexibility in processes, even when more time is needed between adhesive application and [...] adhesive for flat lamination with aggressive bonding strength and, at the same time, very gentle processing characteristics. And yet, the new PUR adhesive Jowa [...] only tackles substrates with high restoring forces but also excels in complex, time-intensive joining procedures. The innovation is thereby setting a new benchmark
    https://www.jowat.com/pt-BR/detalhe-da-redacao/powerful-pur-hot-melt-adhesive-sets-new-benchmarks-in-flat-lamination/

  5. Jowat SE: Successful product launches at Interzum and Ligna

    glulam. The previously unachieved assembly-pressing time ratio of up to 1:1 and flexible assembly times between 10 and 60 minutes in particular sparked a lot [...] product family for load-bearing glulam also proved a major success. For the first time, the adhesives experts from Detmold presented an expanded portfolio of certified [...] among customers with industrial manufacturing processes in which short cycle times and fast throughput speeds are essential. The adhesives manufacturer from Detmold
    https://www.jowat.com/pt-BR/detalhe-da-redacao/jowat-se-successful-product-launches-at-interzum-and-ligna/

  6. The first in its class: Jowat introduces new PUR all-rounder for laminating applications in car interiors

    obsolete with PUR hot melts. The time needed to cool the adhesive down has been reduced to the level of the pressing and holding times of solvent-based adhesives [...] suitable for press lamination as well as for vacuum deep-drawing. Long dwell times and the required energy for drying and evaporation - known from classic so
    https://www.jowat.com/pt-BR/detalhe-da-redacao/the-first-in-its-class-jowat-introduces-new-pur-all-rounder-for-laminating-applications-in-car-inte/

  7. High-performance gluing - Certified PUR adhesives for load-bearing glulam

    applications, provide a choice of assembly times between 10 and 60 minutes, and facilitate an assembly time-pressing time ratio of up to 1:1. Industrial processors [...] load-bearing glulam have become bigger and more sophisticated. At the same time, it provides possibilities for architectural creativity and aesthetics that [...] Depending on the formulation, these adhesives can cure in a short period of time at room temperature already and facilitate almost invisible gluelines due to
    https://www.jowat.com/pt-BR/detalhe-da-redacao/high-performance-gluing/

  8. HolzHer Information: Using PUR Hot Melt in the Holz-Her GluJet - Jowatherm-Reaktant® 608.00/01

    one can at a time or stage the open adhesive cartridges at the work place. When the adhesive is exposed to humidity for an extended period of time, premature [...] premature curing of the hot melt, it is critical to keep accurate track of this time window. ! Important ! – Avoid exposing the PUR hot melt to humidity. Only open
    https://www.jowat.com/pt-BR/detalhe-da-redacao/568/

  9. HolzHer Information: Using PUR Hot Melt in the Holz-Her GluJet - Jowatherm-Reaktant® 608.00/01

    one can at a time or stage the open adhesive cartridges at the work place. When the adhesive is exposed to humidity for an extended period of time, premature [...] premature curing of the hot melt, it is critical to keep accurate track of this time window. ! Important ! – Avoid exposing the PUR hot melt to humidity. Only open
    https://www.jowat.com/pt-BR/detalhe-da-redacao/565/

  10. HolzHer Information: Using PUR Hot Melt in the Holz-Her GluJet - Jowatherm-Reaktant® 608.00/01

    one can at a time or stage the open adhesive cartridges at the work place. When the adhesive is exposed to humidity for an extended period of time, premature [...] premature curing of the hot melt, it is critical to keep accurate track of this time window. ! Important ! – Avoid exposing the PUR hot melt to humidity. Only open
    https://www.jowat.com/pt-BR/detalhe-da-redacao/566/

Ordenar por

Remove all filters