Pesquisar

nossa pesquisa por "Jowat+are+" retornou 100 resultados.

Mostrando resultados 1 a 10 de 100.

• « Página inicial
• ‹ Página anterior
• 1. 1
  2. 2
  3. 3
  4. 4
  5. ...
• Próxima página ›
• Última página »

1. Jowat-Toptherm® 233.10

   several times for casting concrete parts. Jowat-Toptherm ® 233.10 is applied using hot melt guns which are either filled with a cartridge or supplied [...] minutes after bonding. Controlled ambient conditions are not necessary for bonding. The adhesive Jowat-Toptherm ® 233.10 is optimised for this particular [...] removal. The tried and proven PO-based hot melt adhesives from Jowat have been used for many years and are available – adapted to the established applicator systems

   Relevância:

    

2. Jowacoll® dispersions for flat lamination

   manufacture, carrier boards are coated with the most different surfaces. Frequently used materials apart from decor papers and veneers are thermoplastic foils, CPL [...] CPL, and HPL. The fields of application are vast: In the door and flooring industry multi-layer assemblies are manufactured in a single operation. From the core [...] environmental concerns and are unsuitable for many of the new materials. The dispersion adhesives of the Jowacoll ® series are among the efficient alternatives

   Relevância:

    

3. Jowat – Solution Partner Support

   Jowat – Solution Partner Support Working together for the best solution Before our adhesive products get published for sale in [...] excellence in close cooperation with our Solution Partners. Solution Partners are manufacturers of machinery, materials, substrates, application equipment, serving [...] daily life and in new projects – is born in cooperation of these players. Jowat Solution Partner Support is a global team that takes care of these partnerships

   Relevância:

    

4. Adesivos hot melt reativos

   (monomer-reduced) product group from Jowat provides several PUR hot melt adhesives for a wide range of applications which are not classified as hazardous substances [...] The excellent characteristics of these products are well-known and the adhesives are well established in many fields of application due to their [...] as the reactive component and are therefore not subject to hazardous substance labelling. Adhesives from this product group are characterised by a very high

   Relevância:

    

5. Cleaning and adhesive change of Wrapping units

   it must be ensured that the different adhesives are compatible with each other as well as with the Jowat ® flushing agents and cleaners. [...] systems it should be ensured that PUR hot melt adhesives and the Jowat ® flushing agent are melted evenly, to prevent clogged hoses and nozzles due to an unwanted [...] system should be cleaned before downtimes. Jowat supplies a range of flushing agents and cleaners for that purpose. Jowat ® flushing agents push out the adhesive

   Relevância:

    

6. Cleaning of PUR Edgebanders

   started, it must be tested whether the adhesives are compatible with each other as well as with the Jowat ® flushing agents and cleaners. Especially in closed [...] systems it should be ensured that the PUR hot melt adhesive and the Jowat ® flushing agent are melted evenly, to prevent plugged hoses and nozzles due to an unwanted [...] shutdowns, etc.). Jowat supplies a range of flushing agents and cleaners for that purpose. Modern PUR hot melt adhesives for edgebanding are characterised by

   Relevância:

    

7. Cleaning and adhesive change of PUR laminators

   General flow behaviour ©Jowat SE Jowat ® flushing agents purge the adhesive and stop the chemical reaction [...] application system is started, it must be ensured that the Jowat ® flushing agents and the adhesive used are compatible. To prevent plugged hoses or nozzles due [...] systems, it must be ensured that the PUR hot melt adhesive and the Jowat ® flushing agent are melted evenly. The primary task of a flushing agent is to push

   Relevância:

    

8. Cleaning of slot nozzles and applicator heads

   adhesive changes. Jowat supplies a range of flushing agents and cleaners for that purpose.  Jowat ® flushing agents [...] application system is started, it must be ensured that the Jowat ® flushing agent and the adhesive used are compatible. To prevent plugged hoses and nozzles, due [...] systems, it must be ensured that the PUR hot melt adhesive and the Jowat ® flushing agent are melted evenly.

   Relevância:

    

9. Jowacoll® 764.xx film laminating adhesives

   vary from 0.03 μm to 5 μm. They are so small that they are not visible to the naked eye. Only very finely dispersed products are used in print finishing applications [...] Composition Dispersion adhesives are a mixture of two phases. Solid plastic particles are evenly dispersed in an aqueous carrier. Depending [...] use with warm or cold water, using Jowat ® Cleaner Concentrate 192.40. Already dried adhesive can be dissolved using Jowat ® Thinner 401.30. Please also

   Relevância:

    

10. Adesivos à base de solventes

    styrene copolymers (often also called SBS or SIS adhesives) are generally applied with spray guns, and are characterised by a good spraying performance and a relatively [...] (PU or PUR) are characterised by resistance to plasticisers and good adhesion to the most different materials (except bare metal). Therefore they are used for [...] solvent-based adhesives, the bonding substances, also called binding agents, are dispersed in an organic solvent. When the solvent evaporates, the adhesive changes

    Relevância:

     

• « Página inicial
• ‹ Página anterior
• 1. 1
  2. 2
  3. 3
  4. 4
  5. ...
• Próxima página ›
• Última página »