Pesquisar

nossa pesquisa por "time" retornou 9 resultados.

Mostrando resultados 1 a 9 de 9.

1. Jowacoll® dispersions for flat lamination

   possible functional layers and to the finished surface, operations and Pressing times can thus be reduced. Multi-layer modular assemblies have become established [...] absorbent. High temperatures and low humidity reduce the assembly and Pressing times. The minimum film-forming temperature (in short MFFT) is the lowest temperature

   Relevância:

    

2. Cleaning and adhesive change of Wrapping units

   drain valve. The flushing and cleaning procedure should be repeated several times. It is recommended to clean the system again after several days or weeks. Residues

   Relevância:

    

3. Cleaning and adhesive change of PUR laminators

   application system to standard operation mode and repeat the procedure up to three times depending on the degree of soiling.

   Relevância:

    

4. Cleaning of slot nozzles and applicator heads

   drain valve. The flushing and cleaning procedure should be repeated several times. It is recommended to clean the system again after several days or weeks. Residues

   Relevância:

    

5. Jowacoll® 764.xx film laminating adhesives

   bottles which were opened and have been in use have to be re-closed at all times to prevent any reactions with humidity.

   Relevância:

    

6. Hygiene guidelines Dispersions

   hygiene training as part of their induction within an appropriate period of time. Smoking as well as eating and drinking should only be permitted in designated

   Relevância:

    

7. Jowapur® 681.xx product series

   flat bonding, offer the choice of assembly times between 10 and 60 minutes, and facilitate an assembly-pressing time ratio of 1:1 that has never before been achieved [...] Max. assembly time [min] / Temperature [°C] Min. pressing time [min] / Temperature [...] obsolete. Optimised assembly-pressing time ratio The adhesives of the Jowapur ® 681.xx series have undergone

   Relevância:

    

8. Jowatherm® GROW 853.20 & 853.22

   Setting time [s] / Temperature [°C] Open assembly time [min] / Temperature

   Relevância:

    

9. Jowacoll® dispersions with low formaldehyde emissions

   its emissions in the long term. Because that procedure is very expensive and time-consuming, the in-can method has become established for measuring the VOC emissions

   Relevância: