Suche

Description Low-temp Hot Melt Adhesives: Part of Jowat Green Adhesives Sustainability is diverse. This is not just about the use of renewable resources or recycled [...] confidence for the packaging of frozen food because of the very high cold resistance of the adhesive. The modern hot melt adhesive is based on a formulation with [...] many years. Jowat-Toptherm ® 256.10 is a modern hot melt adhesive with universal properties. The adhesive is characterized primarily by a wide range of adhesion

the type of adhesive used. It is recommended that the application system be cleaned before any downtimes and adhesive changes. Jowat supplies a range of flushing [...] purpose. Jowat ® flushing agents purge the adhesive from the system and stop the chemical reaction of PUR hot melt adhesives. Before the cleaning of the application [...] melt adhesive and the Jowat ® flushing agent are melted evenly. Cartridge Melter In case of longer downtimes, flush with one half cartridge or slug of Jowat

foundation of a good night’s sleep and rest. Adhesives are a key component in a very wide range applications in the manufacture of all types of mattresses. [...] bonding of different materials, the adhesive also helps improve comfort and health, and therefore directly contributes to a good night’s sleep. Jowat-Toptherm [...] rm ® 231.60 is a modern PO hot melt adhesive used in the assembly of pocket springs. The adhesive impresses in this application with a log-term durability which

value A new, innovative adhesive of the Jowacoll ® product family has been developed by Jowat specifically for foil lamination of all kind of conventionally or digitally [...] dispersion and hot melt adhesives for lay-flat bindings. Perfectly adapted to this application, these Jowat adhesives facilitate the manufacture of highly demanding [...] demanding applications in the printing industry require innovative adhesive solutions. Jowat adhesives and varnishes are tailored for the individual requirements and

and the purely physical adhesion mechanism of the adhesives facilitate a mechanical removal of the cold adhesive from the bonding surface with virtually no [...] cooling, the adhesive will build up its cohesive strength as well as the adhesion between the bonded parts. The wide range of adhesion of the adhesives facilitates [...] Modern thermoplastic hot melt adhesives based on polyolefin from Jowat bond wood-based materials as well as a wide variety of different plastics with relatively

agent Jowat ® 930.74/.94 until all PUR hot melt adhesive has been extruded from the system. Remnants of flushing agent should remain in all adhesive-carrying [...] tions of the equipment manufacturer. 6. Flush the tank at processing temperature with a small amount of the adhesive to be used, to purge the bulk of the flushing [...] unit of an edgebander after using a reactive hot melt adhesive such as Jowatherm-Reaktant ® with Jowat ® flushing agent. Application support from Jowat's "House

pressure with either the new adhesive itself or with Jowat ® flushing agent 931.00 or 931.10 depending on the viscosity of the adhesive to be purged. In addition [...] Description A fully functional adhesive application system and melting unit are of major importance for a smooth and reproducible adhesive application. The cleaning [...] system and unit, and depends largely on the type of adhesive used. If the old and the new hot melt adhesive are based on different chemicals, it is necessary

increasing demand for Jowat adhesives in the growth region Asia-Pacific and on the strategic importance of these markets for the Jowat Group. The Jowat plant in the [...] covering substantial parts of the entire production portfolio of Jowat. Mainly hot melt and dispersion adhesives are manufactured here. Jowat SE is actually generating [...] was built on an area of approx. 45,000 m². The close proximity to the International Airport of Kuala Lumpur is convenient in terms of traffic and transportation

variety of different materials is one of the oldest applications in the industrial manufacture of furniture and interior furnishings. Hot melt adhesives based [...] been used in this application since the 1960s. The limits of the performance of EVA hot melt adhesives was soon reached due to increasing requirements, especially [...] introduced in the 1980s. Today, hot melt adhesives based on polyolefin (PO) are the established state of the art and the products of choice in general wrapping applications

Description Bio-based Adhesives: Part of Green Adhesives Sustainability is diverse. The avoidance of fossil raw materials and the increased use of renewable resources [...] resources are only part of the whole. With our Jowat Green Adhesives we offer a diverse adhesive portfolio so that you can make your adhesive processes more sustainable [...] 85 Biobased dispersion adhesive for solid wood and wood-based materials Downloads Further Products Further products in the field of „Adesivos de base