Suche

a Pioneer” is to make Jowat become a synonym for adhesive in the industry. Have a look at the three campaign motifs that we started to use in Turkey from October

interesting and entertaining information around the theme of brain science. We have started our campaign already for the Ligna 2015, the worldwide leading trade [...] Interzum 2015, both targeting the Wood, Furniture and Construction market. We have taken up the motto “think differently – better bonding” to continue the campaign

colagens de tensão alta. Depois que todos os solventes evaporaram, não deve haver tack residual. Os substratos colados podem então ser cobertos com tecidos ou

largely on the type of adhesive used. If the old and the new hot melt adhesive have different chemical bases, it is necessary to clean the equipment more thoroughly

skin-friendly. Modern formulations meet most of the aforementioned requirements and have a better environmental compatibility than in the past. But this also means they [...] mould layer (biofilm) on the surface of the adhesive. In short, contaminations have a detrimental effect on the quality of the adhesive, and can make it unusable [...] adhesive in closed containers and to minimise the risk after the containers have been opened. However, the effect of those preservatives is only of limited duration

benefits. They are physiologically harmless, form a colourless bondline, and have a relatively low viscosity. In addition, they can be thinned with water, which

boxes still play a major role in every office. At the same time, manufacturers have become experts at meeting the constantly rising expectations of the customers

cap has to be cut off. 3. Canisters or bottles which were opened and have been in use have to be re-closed at all times to prevent any reactions with humidity [...] component, please refer to the technical data sheet). In addition, many adhesives have been assessed and tested for use in packaging with food contact according to [...] closed hermetically whenever possible. Before processing, the adhesive should have a normal “processing temperature” of around 15 °C – 25 °C. Storage temperatures

products, and substrates in the wood and furniture industry. However, they all have one thing in common: Flat lamination is the partial or full-surface bonding [...] operations and Pressing times can thus be reduced. Multi-layer modular assemblies have become established in the flooring industry. Materials like PET, TPU, or vinyl [...] formaldehyde (UF) resins were the state of the art for many years. Lately, they have increasingly come under critical scrutiny due to modern health and environmental

the adhesives used have to meet the requirements in the industry and ensure a reliable bonding of the changing materials. PU dispersions have become established