Suche

from pulp production residues. However, directly obtained tree resins (Figure 2) or terpene resins (Figure 3), which various citrus fruits, are also an option [...] adhesives have a very low content of monomeric diisocyanate (MDI) of less than 0.1 % and therefore do not require hazard labeling. In addition, from August 24

diisocyanate – in short MDI) of approx. 2 %. Since 2012, products containing isocyanate with a free monomer isocyanate content of 0.1 % or higher must be labelled with [...] information (H and P statements). Adhesives with an MDI content of less than 0.1 % are not subject to hazard labelling requirements. Jowat has successfully

industry and in interior finishing. The carpenter’s glues are supplied in handy 0.5 kg bottles with a reclosable screw cap and have a minimum durability of 24 [...] Jowacoll ® 103.70 (pH-neutral D3 glue), Jowacoll ® 104.20 (general-purpose glue in D2 quality) and Jowacoll ® 119.60 (lacquer glue for bonding difficult surfaces)

począwszy od beczek 180kg poprzez hoboki o wadze ok. 22kg do puszek o pojemności ok. 2 kg oraz kartuszy 310ml. Wszystkie pojemniki są hermetycznie zamknięte w atmosferze [...] ilością kancerogennego monomeru izocyjanianu (monomer reduced- MR). Ilość poniżej 0,1% wolnego monomeru izocyjanianu czyni go bezpiecznym dla osób zatrudnionych

iisocyanate, MDI) in the order of approx. 2 %. Since 2012, products with a free monomeric isocyanate content of 0.1 % and more must be labelled with the GHS [...] statements). Adhesives with a free monomeric isocyanate content of less than 0.1 % are not subject to hazard labelling requirements. Downloads Application Our

SBS 300 ± 50 / 20 1 – 7 51 ± 2 0 = colourless; 4 = red de en fr Jowatac-HighSolid ® 471.60/64 SBS 800 ± 50 / 20 1 – 25 63 ± 2 0 = light brown translucent; 4 [...] 476.70/74 SBS 1.900 / 20 1 - 20 74 0 = colourless; 4 = red de en fr Jowatac-HighSolid ® 482.60/64 SBS 500 / 20 0,5 - 20 60 0 = colourless; 4 = red de en fr Os

3000 / 20 40 > 60 8,0 ± 0,5 / 20 0 = white opaque, 1 = white de en fr Jowapur ® 150.90/91 PU Dispersion 3000 / 20 41 > 55 8,5 ± 0,5 / 20 0 = white opaque, 1 = [...] Dispersion 3000 / 20 40 > 55 8,0 ± 0,5 / 20 white opaque de en fr Jowapur ® 151.50 2-Component Dispersion 1750 / 20 43 > 60 8,0 ± 0,5 / 20 white opaque de en fr

11000 ± 2000 / 20 6 ± 2 / RT 3,0 ± 0,5 / 20 D3 / D4 de en fr Jowacoll ® 104.20 PVAc Dispersion 10500 ± 2000 / 20 9 ± 2 / RT 4,5 ± 0,5 / 20 D2 de en fr hot melt

e diisocyanate – also referred to as MDI) in the order of 2 %. Since 2002, products containing 0.1 % or more of free monomeric isocyanate must be labelled with [...] statements). Adhesives with a free monomeric isocyanate content of less than 0.1 % are not subject to hazard labelling and therefore play a major role in f

according to the standard have to be resistant against solvents (DIN ISO 2836, 6.2.2, 6.2.3) and alkali (DIN ISO 2836; 5.3). If special inks or Pantone inks are used [...] Depending on the type of dispersion, the size of the plastic particles can vary from 0.03 μm to 5 μm. They are so small that they are not visible to the naked eye. [...] applications, with particle diameters between approx. 200 and 800 nm (1 nm = 0.001 μm) that deliver a very clear and transparent adhesive film. The technical