Suche

fleece. The filter manufacturing process is delicate and, in addition to bonding, the adhesive used has to fulfill a wide range of functions. Building filters for [...] manufacturers pleat the filter media and stabilize it using a hot melt adhesive.” Adhesives like Jowatherm 262.25 based on ethylene-vinyl acetate (EVA) are optimally [...] filters is due to the adhesive used in the manufacturing process of HEPA filters. “Big filter elements contain up to six kilograms of adhesive,” says Dressler. It

Green Adhesives Jowat supplies a comprehensive portfolio of green adhesives to facilitate the sustainable bonding of building elements. The adhesive manufacturer [...] does the adhesive have on the consumer? What impact does the adhesive have on processors during the bonding application? And how does the adhesive influence [...] holistic approach with its Green Adhesives , aimed at developing 360° sustainable adhesives that do not require any compromise of bonding quality nor of process reliability

apply dots or beads of hot adhesive onto the surfaces to be bonded. This often has an undesired side effect, where the applied adhesive is pulling behind it a fine [...] wasting adhesive, this also increases the cleaning effort, leading to extended maintenance and production standstills. The success of PO hot melt adhesives has [...] temperature. It determines the viscosity of the adhesive and largely influences the cut-off of the adhesive at the nozzle. The temperature at the applicator