Suche

The professional article is published the 15/4/2015 in the journal ‚adhesion ADHESIVES & SEALANTS‘. You can download the article down below.

suitable hot melt for their specific requirements. Selecting the adhesive system: thermoplastic vs moisture-curing In general, there are two different hot melt [...] (EVA), polyolefin (PO), polyurethane (PU)). From all hot melt adhesives, moisture-curing polyurethane hot melts (PUR HM) are the high-end solution due to their [...] reliable, and resulted in a very efficient production system. Adhesives Hot melt adhesives are the right choice for production at Herrljunga. The surface of

nated papers and laminates, or thermoplastic foils – moisture-curing PUR hot melt adhesives are able to compensate for the forces acting on the bondline and [...] processes. Combined with the high initial strength after joining, this makes PUR hot melt adhesives suitable for continuous inline production. These surface adhesives [...] general bonding behaviour. Either completely physical setting (cooling of the melt and hardening, or evaporation of solvents or water and solidification), physical

method. The fault tolerant and customisable hot melt strips from Schümann are perfect for this sealing method. The hot melt strips run smoothly on the automatic packaging [...] folded, the hot melt strip securely closes the packaging at the end of the bagging process. Up to 600 bags per hour are folded and closed with a hot melt sealing [...] The newest Jowat products are hot melt adhesives based on polyolefin (PO) from the group of Jowat-Toptherm ® products. PO hot melts are solvent-free adhesives

laminating. Thermoplastic and reactive hot melt adhesives for mattress manufacturing The longer open time of pressure-sensitive hot melts, dispersions and solvent-based [...] number one choice in mattress manufacturing. However, pressure-sensitive hot melt adhesives provide only a limited heat resistance and bondings may fail during [...] groups are now being replaced by more powerful thermoplastic and reactive hot melt systems. The new adhesives are all-rounders and very versatile. Therefore

O artigo profissional é publicado na Revista VETAS N° 404 Março 2016. www.vetas.com

conditions. A trend towards PUR hot melt adhesives can be observed, based on the growing requirements regarding heat resistance. PUR hot melts inherently come with [...] major role in the manufacture of functional building textiles. Modern Jowat hot melt adhesives based on polyolefin and polyurethane support the functional properties [...] manufactured of two layers of polyester fleece, which are laminated with a PO hot melt. The adhesive is extruded through a nozzle applicator and placed as a film

to wider variations in the surface tension of decor materials. The new PUR hot melt represents a consequent improvement and complement of tested and proven adhesives [...] pressing zones or pressing times. Due to the broader range of adhesion, the PUR hot melt provides an optimum adhesion to substrates such as PVC and aluminium profiles [...] adhesive, the optimum temperature for melting and processing of the new PUR hot melt is about 120 °C. Plastic foils are therefore exposed to less thermal stress

fogging and emissions and are odourless. EVA hot melt adhesives building filters Jowat supplies special hot melt adhesives based on EVA for the pleating of filters [...] pockets do not develop leaks. In addition, the hot melt adhesive has an excellent resistance to oxidation in the melt. This leads to less charring and cleaning and [...] back on a successful trade fair. Especially a newly developed polyolefin hot melt adhesive for pleating and frame assembly attracted wide interest among visitors

a powerful PUR hot melt for thin, transparent foils, which was presented at the LIGNA 2017. Due to the broad spectrum of adhesion, hot melt adhesives based [...] PU, with different gloss effects and tactile properties. The new reactive hot melt adhesive from the Jowatherm-Reaktant ® series is also characterised by highest