Suche

nossa pesquisa por "bonds" retornou 6 resultados.

  1. Polyurethane hot melt adhesives for mattress manufacture: Highest quality, maximum efficiency

    manufacture of foam mattresses with innersprings. In addition, PUR hot melt bonds are characterised by high resistance to heat and sterilisation. Processors [...] application amount compared to the one-sided application. The result: Permanent bonds for quality mattresses. The professional article is published in the magazine
    https://www.jowat.com/pt-BR/detalhe-da-redacao/polyurethane-hot-melt-adhesives-for-mattress-manufacture-highest-quality-maximum-efficiency/

  2. Sticking PUR - mattress bonding with Jowatherm-Reaktant® 639.20

    in terms of comfort; quite the opposite, in fact, since the soft adhesive bonds and minimal tacky adhesive surface residue left behind by PUR prevent any
    https://www.jowat.com/pt-BR/detalhe-da-redacao/sticking-pur-mattress-bonding-with-jowatherm-reaktantr-63920/

  3. Understanding – Bonding – Performing: Strong support for a smooth adhesive change

    processor. Comparative bonding tests with currently used adhesives, sample bonds and substrates, as well as other Jowat adhesive products are carried out in
    https://www.jowat.com/pt-BR/detalhe-da-redacao/understanding-bonding-performing-strong-support-for-a-smooth-adhesive-change/

  4. Dispersions at work – versatile and trusted wood adhesives

    they must be protected by an adequate surface coating. Moisture-resistant bonds require special reactive one- and two-component D4 dispersions. That latest
    https://www.jowat.com/pt-BR/detalhe-da-redacao/dispersions-at-work-versatile-and-trusted-wood-adhesives/

  5. High-performance adhesives for the manufacture of filter media

    Thermoplastic PO and reactive PUR hot melt adhesives facilitate flat surface bonds of activated charcoal media with a high permeability of the filter medium.
    https://www.jowat.com/pt-BR/detalhe-da-redacao/high-performance-adhesives-for-the-manufacture-of-filter-media/

  6. Sustainable Bonding with Packaging Hot Melt Adhesives

    Definitions Microplastics Microplastics can be divided into three general groups: primary microplastics type A, primary microplastics type B, and secondary microplastics (cf. figure 1). The latter is
    https://www.jowat.com/pt-BR/detalhe-da-redacao/sustainable-bonding-with-packaging-hot-melt-adhesives/

Ordenar por

Remove all filters