Suche

Green Adhesives Jowat supplies a comprehensive portfolio of green adhesives to facilitate the sustainable bonding of building elements. The adhesive manufacturer [...] does the adhesive have on the consumer? What impact does the adhesive have on processors during the bonding application? And how does the adhesive influence [...] holistic approach with its Green Adhesives , aimed at developing 360° sustainable adhesives that do not require any compromise of bonding quality nor of process reliability

fleece. The filter manufacturing process is delicate and, in addition to bonding, the adhesive used has to fulfill a wide range of functions. Building filters for [...] manufacturers pleat the filter media and stabilize it using a hot melt adhesive.” Adhesives like Jowatherm 262.25 based on ethylene-vinyl acetate (EVA) are optimally [...] filters is due to the adhesive used in the manufacturing process of HEPA filters. “Big filter elements contain up to six kilograms of adhesive,” says Dressler. It

apply dots or beads of hot adhesive onto the surfaces to be bonded. This often has an undesired side effect, where the applied adhesive is pulling behind it a fine [...] wasting adhesive, this also increases the cleaning effort, leading to extended maintenance and production standstills. The success of PO hot melt adhesives has [...] temperature. It determines the viscosity of the adhesive and largely influences the cut-off of the adhesive at the nozzle. The temperature at the applicator

hazard-free—PUR hot melt adhesives have long been an integral part of Jowat’s Green Adhesives portfolio of highly sustainable bonding solutions for an extremely [...] key ingredient in reactive PUR hot melt adhesives. While some of the isocyanate is bound into polymers, the adhesive also contains a certain amount of monomeric [...] regulation, adhesives are not subject to the hazard labeling requirement if the monomeric MDI concentration is less than 0.1 percent. Sustainable adhesive solutions

Increasing sustainability in adhesive bonding can only succeed by looking at different dimensions. The optimization of the adhesives themselves is particularly [...] basis of the adhesive's formulation? What impact does the adhesive used have on consumers? What effects does its use have on the users in the bonding process? And [...] employees. By changing the adhesive they use, for example by switching to monomer-reduced PUR hot melt adhesives or to solvent-based adhesives with a high solids content

t PUR adhesives. The adhesives can be processed with all variations without limitations. Jowat advises interested processors to contact the adhesives manufacturer [...] the adhesives manufacturer Jowat from Detmold is certified according to EN 15425:2017 and provides a wide range of one-component PUR prepolymer adhesives for [...] our customers who use the adhesives in their production has been positive without exception.” High-tech fibres for strong bonding In addition to the efficiency

crosslinking reaction and largely influences the excellent bonding characteristics of those adhesives. However, the diisocyanates can lead to the formation of [...] portfolio of monomer-reduced PUR hot melt adhesives not subject to hazard labelling for many years already. Adhesives from the Jowatherm-Reaktant ® MR product [...] reason to change to modern adhesives of course also lies in the protection of employees. In addition, the modern PUR MR hot melt adhesives from Jowat often also

service and with certified high-performance adhesives. One family for all cases The one-component PUR prepolymer adhesives of the Jowapur® 681.xx product family are [...] changing the adhesive and without the need for major investments. PUR – Full of benefits Compared to other technologies, PUR prepolymer adhesives for the manufacture [...] Business Development Load-bearing Glulam at Jowat SE. “And adhesive bonding is a future-oriented joining method that minimises construction costs and time in

The German adhesives industry does not use any primary microplastics that are released when the products are used correctly. Even if certain adhesive raw materials [...] that no adhesive components enter the marine environment. Nevertheless, if glued products enter the sea because of improper disposal, the adhesive also becomes [...] modern application technology and optimised hot melt adhesives. Modern, low-density hot melt adhesives with a wide range of adhesion facilitate high bond strengths

How PUR hot melt adhesives can be used in future For many years, Jowat has been developing and manufacturing reactive hot melt adhesives for the most different [...] Reactive hot melt adhesives from the Jowatherm-Reaktant® product group have been at the cutting edge of permanent and superior bonding. An important building [...] building block of those reactive hot melt adhesives is monomeric diisocyanate. The processing of adhesives containing isocyanate has always been coupled with pr