Suche

nossa pesquisa por "require" retornou 6 resultados.

  1. Epoxy Resin Jowat® 692.30

    1995-1-1/NA for Switzerland. Approvals and certifications for other countries require separate testing. Suited for interior as well as exterior applications. The
    /pt-BR/adhesives/reactive-systems/jowat-2-c-epoxy-resins/jowat-epoxy-resin-69230/

  2. Jowacoll® Dispersions for Flat Lamination

    become established in the flooring industry. Materials like PET, TPU, or vinyl require special adhesive systems to reach maximum adhesion. Jowacoll ® foil adhesives [...] choosing an adhesive. Porous and moisture-absorbing substrates like veneer require another adhesive compared to non-absorbent substrates with a low surface tension
    /pt-BR/adhesives/dispersion-adhesives/jowacoll-dispersions-for-flat-lamination/

  3. “Tuning for Print Products“ (2016)

    print sheet lamination. Highly demanding applications in the printing industry require innovative adhesive solutions. Jowat adhesives and varnishes are tailored
    /pt-BR/profile/campaigns/tuning-for-print-products-2016/

  4. Jowatherm-Reaktant® 638.20

    not expose the substrate to high heat. In addition, the adhesive does not require high temperatures for melting and application and thereby saves energy in
    /pt-BR/adhesives/reactive-hot-melt-adhesives/jowatherm-reaktant-pur-hotmelt/jowatherm-reaktantr-63820/

  5. Jowatherm-Reaktant® 609.40

    processin temperature compared with other hot melt adhesives which, in some cases, require temperatures of more than 170°C. Jowatherm-Reaktant ® 609.40 has been specially
    /pt-BR/adhesives/reactive-hot-melt-adhesives/jowatherm-reaktant-60940/

  6. Jowatherm-Reaktant® 613.18

    represents a particular challenge. Commonly used waterbased PU dispersions require a sufficiently high pressure to achieve a good bond. The lamination of the
    /pt-BR/adhesives/reactive-hot-melt-adhesives/jowatherm-reaktant-61318/

Ordenar por

Remove all filters