Suche

nossa pesquisa por "distribution of jowat adhesives" retornou 199 resultados.

  1. Jowat AG at the Hannover Messe 2014. - Practical Demonstration: Jowat casting compound in low-pressure injection moulding

    The casting compounds as relatives of adhesives provide much more than just the primary function of bonding: Due to the use of suitable raw materials in conjunction [...] Hotmelt- und Expansionstechnologie, Jowat AG gives a live demonstration of processing a hot melt casting compound. The result of this practical demo is a give-away [...] visitors may take home. Apart from the casting compounds, Jowat supplies a wide range of industrial adhesives. A special polyolefin-based assembly hot melt for cores
    https://www.jowat.com/pt-BR/detalhe-da-redacao/jowat-ag-at-the-hannover-messe-2014-practical-demonstration-jowat-casting-compound-in-low-pressu/

  2. Laminated timber assembly: The winner in open and pressing time – now it stands at about 1:1

    686.70 is very different and introduces a new generation of adhesives that combine a high quality of the end product with substantially increased efficiency [...] the time remaining for adhesive application on large-surface laminated timber, which is the process step crucial for the quality of the end product, was very
    https://www.jowat.com/pt-BR/detalhe-da-redacao/laminated-timber-assembly-the-winner-in-open-and-pressing-time-now-it-stands-at-about-11/

  3. Innovations for the Ligna 2013: Attractive adhesives – powerful, efficient, ecological!

    even up to 80 °C. The reduction of VOC emissions is possible with modern PO adhesives like Jowat-Toptherm® 236.30. Adhesive formulations based on the new PO [...] the adhesives should offer long processing and short pressing times. The long open time of the new Jowapur® 686.70 makes this adhesive the product of choice [...] PO hot melts are used, for instance the new Jowat-Toptherm® 236.30. The performance spectrum of this adhesive covers for example highest surface quality and
    https://www.jowat.com/pt-BR/detalhe-da-redacao/innovations-for-the-ligna-2013-attractive-adhesives-powerful-efficient-ecological/

  4. Jowat bonds foam for sweet dreams: New Jowat adhesive for mattress manufacture

    New: Jowat-Toptherm® for mattress manufacture This newcomer to the product group of Jowat-Toptherm® adhesives was developed specifically for industrial mattress [...] nonwovens, hessian and coir. In spite of its low viscosity, it is characterized by a high green strength and very fast build-up of strength, and this perfectly balances [...] compound. Contrary to the normal and expected behaviour of thermoplastic hot melts, the new adhesive provides at the same time excellent wetting properties due
    https://www.jowat.com/pt-BR/detalhe-da-redacao/jowat-bonds-foam-for-sweet-dreams-new-jowat-adhesive-for-mattress-manufacture/

  5. New formula: Thermoplastic adhesives for high-quality lamination of wood-based substrates – for general use with all common laminating machines using in- or offline application.

    product family of Jowat-Toptherm® permit a homogenous adhesive application without any striping effect. Depending on the quality of the surface of the specific [...] manufacture. These new members of the product family of Jowat-Toptherm® are free of formaldehyde and in comparison to dispersion adhesives hot melt formulations do [...] these new formulations based on polyolefins allow to create adhesive bondlines with a degree of hardness tailored for specific applications – ranging from medium
    https://www.jowat.com/pt-BR/detalhe-da-redacao/new-formula-thermoplastic-adhesives-for-high-quality-lamination-of-wood-based-substrates-for-gene/

  6. Jowat AG – ZOW 2013: Intelligent bonding systems 3.0 Industrial adhesives with functional added values

    for the performance of a hot melt adhesive. One of the marks of quality is the surface hardness of a coating. Adhesives of the Jowat-Toptherm® product range [...] The degree of gloss of the components is additionally enhanced when a colourless, transparent, and crosslinking hot melt of the product group of Jowatherm-Reaktant® [...] a crucial factor in the development of new adhesive formulations. Part of this strategic direction is the integration of additional advantages to allow customers
    https://www.jowat.com/pt-BR/detalhe-da-redacao/jowat-ag-zow-2013-intelligent-bonding-systems-30-industrial-adhesives-with-functional-added-valu/

  7. Clean air in the passenger compartment: Jowat adhesives for the manufacture of filter media

    absorption capacity of its filtering medium: The innovative laminating adhesives from Jowat AG ensure optimum filtering performance of the activated charcoal [...] keep manufacturing processes efficient. Using lower amounts of adhesives improves the capacity of the filter media and reduces production costs at the same time [...] developing the new Jowat-Toptherm® and Jowatherm-Reaktant® adhesives. With these products, very good results are achieved in the lamination process of the filter
    https://www.jowat.com/pt-BR/detalhe-da-redacao/clean-air-in-the-passenger-compartment-jowat-adhesives-for-the-manufacture-of-filter-media/

  8. Filters in top shape: Jowatherm® and Jowat-Hightherm® for pleating and frame bonding

    processing of the pleated filter media without intermediate storage. In addition, both Jowatherm® and Jowat-Hightherm® adhesives have a wide spectrum of adhesion [...] and Jowat-Hightherm® adhesives keep the filter media in shape and are responsible to a large extent for the long life of the filter elements. Bonding of filter [...] hot melt adhesives Jowatherm® and Jowat-Hightherm® are highly flexible and reliable in processing, ensuring the assembly of air filter elements of superior
    https://www.jowat.com/pt-BR/detalhe-da-redacao/filters-in-top-shape-jowathermr-and-jowat-highthermr-for-pleating-and-frame-bonding/

  9. Jowat AG at the Filtech Strong performance record: New adhesives for the filter manufacture

    improved performance of the product - the filter action itself. Pleating and filter frame bonding The adhesives from the group of Jowat-Hightherm® are especially [...] The efficient manufacture of filter systems requires modern adhesives that are tailored to fit the diverse manufacturing steps of lamination, pleating and frame [...] provide an increased capacity of performance for the filter media and facilitate efficiency of the entire production process. Lamination of filter media made with
    https://www.jowat.com/pt-BR/detalhe-da-redacao/jowat-ag-at-the-filtech-strong-performance-record-new-adhesives-for-the-filter-manufacture/

  10. Techtextil 2013: Strong adhesives for lamination of NFPP and PP in car interiors - Reliable bonding for highly difficult surfaces by using reactive hot melt adhesives

    product family of Jowat-Toptherm® allows precoating of decor materials for subsequent reliable bonding to NFPP components. Surface pretreatment of the NFPP prior [...] This adhesive from the group of Jowatherm-Reaktant® entirely eliminates the step pretreatment of the polypropylene (PP) - surfaces before bonding. One of the [...] The process of thermoplastic precoating of decor materials - either pre-cut or on reels – with polyamide (PA) or polyester hot melt adhesives (PES) has been
    https://www.jowat.com/pt-BR/detalhe-da-redacao/techtextil-2013-strong-adhesives-for-lamination-of-nfpp-and-pp-in-car-interiors-reliable-bonding/

Ordenar por

Remove all filters