Suche

aplicações da Jowat SE. “Se os veículos não precisarem mais ser controlados manualmente, módulos inteiros poderão ser removidos, como o volante e o câmbio.” Novas [...] adesivos. Com o Jowatherm-Reaktant® MR 642.90, a especialista oferece um adesivo PUR hot melt com teor de monômeros reduzido para laminação do interior da cabine

adhesives (short: PUR prepolymers) are high-performance adhesives characterised by a broad spectrum of adhesion and bonding properties. PUR prepolymers are [...] available as one-component or two-component products. Benefits of one-component (1C) PUR prepolymer adhesives - good penetration into the substrate - no mixing necessary

with very high requirements and elastic properties. The advantages compared to PUR adhesives are a wide field of applications and the formulation free of isocyanates [...] as well as for sealing. For instance as a reliable all-purpose product in manual and industrial assembly processes, e.g. bonding end trims or filling expansion

show for the windows industry: Jowatherm-Reaktant® MR 604.90 is the first PUR hotmelt adhesive with a reduced monomer content and thus hazard-free labelling certified

cleaners. Especially in closed application systems it should be ensured that PUR hot melt adhesives and the Jowat ® flushing agent are melted evenly, to prevent [...] prevent clogged hoses and nozzles due to an unwanted reaction. If a reactive PUR hot melt adhesive has been processed, the system should be cleaned before downtimes [...] Jowat ® flushing agents push out the adhesive and stop the chemical reaction of PUR hot melts. Cleaning with chemical cleaners is usually not necessary if only

agents purge the adhesive from the system and stop the chemical reaction of PUR hot melt adhesives. Before the cleaning of the application system is started [...] reaction, especially in closed application systems, it must be ensured that the PUR hot melt adhesive and the Jowat ® flushing agent are melted evenly. Cartridge [...] agent. Turn off the unit and allow cooling. If the processed adhesive was a PUR hot melt, it is especially important that all adhesive remnants are purged from