Applikation Beskrivning

Kantlistning med smältlim

Under årtionden har kantlistning av träbaserade skivmaterial med de mest varierande kantmaterial varit etablerad praxis inom möbelindustrin. Kvalitetskraven avseende visuellt intryck, den tekniska utvecklingen inom området och även den nära nog obegränsade mångfalden av material som ska bearbetas - är alla faktorer som utgör särskilda utmaningar för limtekniken. I modern, högkvalitativ möbeltillverkning är kvaliteten på kantlistningen ett allt viktigare kriterium för att bedöma kvaliteten på hela möbeln. Slutkunden kräver en limfog som är perfekt och nästan osynlig.

Produktinformation

Choose a product group
  • EVA hot melt adhesive
  • PO hot melt adhesive
  • PUR hot melt adhesive
  • PUR hot melt adhesive (non-hazardous)

EVA hot melt adhesive

Base Viscosity [mPas] /
Temperature [°C]
Processing
Temperature [°C]
Softening Range
(Kofler) [°C]
Density [g/cm³] /
Temperature [°C]
Appearance Download
technical
data sheet (PDF)
Jowatherm® 280.00 EVA Hot Melt Adhesive 35500 ± 11750 / 200 180 - 200 90 ± 5 1,03 ± 0,03 / 20 yellow translucent de en fr
Jowatherm® 280.10/11 EVA Hot Melt Adhesive 165000 ± 25000 / 200 190 - 210 100 ± 5 1,03 ± 0,02 / 20 0 = light beige; 1 = white de en fr
Jowatherm® 280.30/31 EVA Hot Melt Adhesive 50500 ± 12500 / 200 180 - 200 90 ± 5 1,03 ± 0,03 / 20 0 = yellow translucent; 1 = white de en fr
Jowatherm® 280.50/51 EVA Hot Melt Adhesive 85000 ± 13000 / 200 180 - 200 95 ± 5 1,14 ± 0,02 / 20 0 = light beige; 1 = white de en fr
Jowatherm® 280.58 EVA Hot Melt Adhesive 85000 ± 10000 / 200 180 - 200 95 ± 5 1,00 ± 0,02 / 20 colourless de en fr
Jowatherm® 284.70/71/72/73 EVA Hot Melt Adhesive 85000 ± 20000 / 200 190 - 210 90 ± 5 1,52 ± 0,03 / 20 0 = beige; 1 = white; 2 = brown; 3 = black de en fr
Jowatherm® 286.30/31 EVA Hot Melt Adhesive 50000 ± 15000 / 200 180 - 200 90 ± 5 1,05 ± 0,05 / 20 0 = yellow translucent; 1 = white de en fr
Jowatherm® 286.60/61 EVA Hot Melt Adhesive 62500 ± 12500 / 200 180 - 200 95 ± 5 1,30 ± 0,05 / 20 0 = beige; 1 = white; 2 = brown; 3 = black de en fr
Jowatherm® 288.60/61/62/63 EVA Hot Melt Adhesive 90000 ± 20000 / 200 180 - 200 95 ± 5 1,33 ± 0,05 / 20 0 = beige; 1 = white; 2 = brown; 3 = black de en fr

PO hot melt adhesive

Base Viscosity [mPas] /
Temperature [°C]
Processing
Temperature [°C]
Softening Range
(Kofler) [°C]
Density [g/cm³] /
Temperature [°C]
Appearance Download
technical
data sheet (PDF)
Jowat-Toptherm® 227.30 PO Hot Melt Adhesive 100750 ± 20000 / 200 190 - 210 135 ± 5 1,10 ± 0,05 / 20 beige de en fr
Jowat-Toptherm® 237.10/11 PO Hot Melt Adhesive 85500 ± 14000 / 200 180 - 200 130 ± 5 1,10 ± 0,02 / 20 0 = beige, 1 = white de en fr
Jowat-Toptherm® 237.70/71/72/73 PO Hot Melt Adhesive 83000 ± 10000 / 200 170 - 200 130 ± 5 1,23 ± 0,05 / 20 0 = light beige; 1 = white, 2 = brown, 3 = black de en fr
Jowat-Toptherm® 221.00 PO Hot Melt Adhesive 23200 ± 2200 / 200 115 ± 5 0,90 ± 0,03 / 20 yellow de en fr
Jowat-Toptherm® 237.50 PO Hot Melt Adhesive approx. 95.000 / 140 190 - 210 approx. 125 approx. 0,9 colourless de en fr

PUR hot melt adhesive

Base Viscosity [mPas] /
Temperature [°C]
Processing
Temperature [°C]
Softening Range
(Kofler) [°C]
Density [g/cm³] /
Temperature [°C]
Appearance Download
technical
data sheet (PDF)
Jowatherm-Reaktant® 607.40/41/45 PUR Hot Melt Adhesive 77500 ± 22500 / 140 130 - 150 70 ± 5 1,35 ± 0,05 / 23 0 = beige; 1 = white; 5 = pure white de en fr
Jowatherm-Reaktant® 607.50/51 PUR Hot Melt Adhesive 75000 ± 25000 / 140 130 - 150 70 ± 5 1,35 ± 0,05 / 23 0 = beige; 1 = white de en fr
Jowatherm-Reaktant® 607.60/61 PUR Hot Melt Adhesive 75000 ± 25000 / 140 140 - 160 80 ± 5 1,32 ± 0,05 / 20 0 = beige; 1 = white de en fr
Jowatherm-Reaktant® 608.00/01 PUR Hot Melt Adhesive 90000 ± 20000 / 120; 42500 ± 7500 / 140 100 - 120 65 ± 5 1,1 ± 0,1 / 23 0 = yellowish opaque; 1 = white de en fr

PUR hot melt adhesive (non-hazardous)

Base Viscosity [mPas] /
Temperature [°C]
Processing
Temperature [°C]
Softening Range
(Kofler) [°C]
Density [g/cm³] /
Temperature [°C]
Appearance Download
technical
data sheet (PDF)
Jowatherm-Reaktant® MR 607.90/91 Monomer-Reduced PUR Hot Melt Adhesive 75000 ± 25000 / 140 120 - 140 70 ± 5 1,28 ± 0,08 0 = beige; 1 = white de en fr
Jowatherm-Reaktant® MR 608.90 Monomer-Reduced PUR Hot Melt Adhesive 60000 ± 20000 / 140 120 - 140 70 ± 5 1,1 ± 0,1 0 = yellow opaque; 1 = white de en fr
Jowatherm-Reaktant® MR 606.90 Monomer-Reduced PUR Hot Melt Adhesive 95000 ± 25000 / 150 120 - 140 1,1 ± 0,1 / 20 de en fr

The products listed only represent a limited selection of the available product portfolio. Product availability might differ by region. The technical data, characteristics and field of application provided in the table outline the differences between the individual adhesives of the product portfolio. Our Application Technology Department and our Sales Representatives are on hand to provide advice and support you finding the best adhesive for your particular application.

Note: The information on this page is based on test results from our laboratories as well as on experience gained in the field, and does in no way constitute any guarantee of properties. Due to the wide range of different applications, substrates, and processing methods beyond our control, no liability may be derived from these indications nor from the information provided by our free technical advisory service. Customer trials under everyday conditions, testing for suitability at normal processing conditions, and appropriate fit-for-purpose testing are absolutely necessary. For the specifications as well as further information, please refer to the latest technical data sheets.

Nyheter och artiklar

Topnews
For challenging ambient conditions: Fast-crosslinking PUR edgebanding adhesive Jowatherm-Reaktant® 607.10
Möbler
Nya produkter

Economical processes due to high initial strength, Good bonding strengths and broad spectrum of adhesion.

Topnews
Möbler
Media

Wondering how much the edgeband adhesive for a kitchen costs?

Actually less than you might think!

Topnews
Möbler
News

Jowat develops new monomer-reduced PUR hotmelt adhesive for edgebanding without GHS labelling.

Topnews
PUR granulate monomer free
Trä
Möbler
Byggnadselement
Pressmeddelande

Jowat, the adhesives specialist from Detmold, to showcase first PUR hot melt granules for edgebanding with hazard-free labelling in world premiere…

Topnews
Möbler
News

Jowat now supplies the worldwide first monomer-reduced PUR edgebanding adhesive available as granules, Jowatherm-Reaktant® MR 607.90.

Topnews
Möbler
Professionella artiklar

Introduced in the 1950s, particleboard has been one of the most important innovations in the furniture manufacturing industry. To this day,…

applikations Tips

Directions for use

PUR hot melt adhesives can be processed on throughfeed lines at different feed speeds, as well as on roller and nozzle applicators. All parts of the melting and application units coming into contact with the adhesive should have a non-stick coating to prevent possible catalytic reactions due to metal contact. A non-stick coating will also facilitate a considerably easier cleaning.
The melting and application units should be equipped with a precise temperature control to prevent local overheating and unwanted secondary reactions. Heating the adhesive to a temperature above the recommended processing temperature will usually lead to a fast increase in viscosity of the melt due to a so-called thermal crosslinking reaction in the adhesive (the allophanate reaction), which is triggered by heat and does not need moisture.

Cleaning

If necessary, flush out hot melt remnants from the melt and applicator units with flushing agent Jowat® 930.94 (red). Crosslinked, solid material has to be dissolved with cleaner Jowat® 930.60 (please test for suitability before use).

Cleaning and adhesive change of Edgebanders

See our Jowat Manual with Tips and Video How To Guide for cleaning problems and helpful tips for adhesive changes

Nedladdningar

Adhesive Portfolio for the Furniture Industry.PDF

Ytterligare tillämpningar