A constantly growing variety of different materials is used in the textile industry to manufacture laminated and coated textiles for a wide range of products. Whether clothing textiles of all kinds, textiles for car parts, products for the building industry or home products – the bonded substrates in laminated textiles are as diverse as the purpose of the products: foams, fleece, cotton or polyester, and glassfi bre fabric with aluminium foil. The possibilities to add special functions to textiles are just as diverse.
Membranes and textiles are laminated using thermoplastic and reactive hot melt adhesives. Moisture-curing PUR hot melt adhesives meet highest requirements for a broad spectrum of adhesion to different materials, high compound strength even with small application amounts, low processing temperature, as well as the resistance necessary in processes such as washing or sterilisation. Thermoplastic hot melts are adapted to the individual and often very specific demands. In membrane laminating, they support special properties in the end product, such as breathability, flame retardancy or noise absorption. A wide range of adhesion is here also an essential requirement due to the different substrates from which membranes are manufactured, such as PP, PE or PU.
Selected Jowat adhesives for the textile industry are tested and certified according to the ECO PASSPORT of the Hohenstein Institute. This certification verifies the human ecological safety of the adhesive for the use in textiles according to OEKO-Tex® Standard 100. The OEKO-Tex® Standard guarantees to the consumer that a textile product does not contain any harmful substances above a binding limit. The OEKO-TEX® tests for harmful substances take into account the purpose of the textile and divide articles into four product categories. From articles for babies and children up to 3 years, to furnishing materials such as covers for upholstery furniture – the closer the skin contact and the more sensitive the target group is, the stricter are the human ecological requirements which have to be met. Jowat adhesives fulfi l the criteria of product class 1.
|Base|| Viscosity [mPas] /|
data sheet (PDF)
|Jowatherm-Reaktant® 637.10||PUR Hot Melt Adhesive||14000 / 100||90 - 110||For the manufacture of compound elements in the textile industry.||+||de en fr|
|Jowatherm-Reaktant® 638.20||PUR Hot Melt Adhesive||5500 / 100||90 - 110||manufacture of compound elements||+||de en fr|
|Jowatherm-Reaktant® 639.00||PUR Hot Melt Adhesive||10000 / 100||100 - 120||For the manufacture of compound elements in the textile industry.||de en fr|
|Jowatherm-Reaktant® GROW 631.20||Biobased Hot Melt Adhesive||8000 ± 2000 / 140||110 - 140||Laminating adhesive for manufacturing substrates for interior car trims, e.g. percel shelves, headliners, door trim, etc. Also for the assembly if composite materials in the textile industry.||de en|
The products listed only represent a limited selection of the available product portfolio. Product availability might differ by region. The technical data, characteristics and field of application provided in the table outline the differences between the individual adhesives of the product portfolio. Our Application Technology Department and our Sales Representatives are on hand to provide advice and support you finding the best adhesive for your particular application.
Note: The information on this page is based on test results from our laboratories as well as on experience gained in the field, and does in no way constitute any guarantee of properties. Due to the wide range of different applications, substrates, and processing methods beyond our control, no liability may be derived from these indications nor from the information provided by our free technical advisory service. Customer trials under everyday conditions, testing for suitability at normal processing conditions, and appropriate fit-for-purpose testing are absolutely necessary. For the specifications as well as further information, please refer to the latest technical data sheets.