Uygulama Açıklaması

Esnek ve güçlü torbalar ve çantalar, dökme materyaller gibi malların güvenli bir şekilde taşınmasını sağlamaktadır. Mekanik gerilim ve neme karşı ürünleri korumak adına, bu ambalaj genellikle çeşitli kağıt-plastik folyo veya kağıt-kağıt veya kağıt-alüminyum folyo katmanlarından oluşan kompozit bir materyalden üretilmektedir. Üretimde kullanılan özel Jowacoll® dispersiyon yapıştırıcılar, örneğin, kağıt-plastik bileşenin lifsiz ayrılmasını sağlamaktadır. Buna ilaveten, yapıştırıcılar, üstün besleme özelliklerine sahip olup temizlenmesi kolaydır. Farklı materyallere güvenilir kalıcı bir yapışma sağlarken gıdayla temas eden materyal yönetmeliklerinin gereklerini yerine getirmektedir.

Ürün Bilgileri

-

Base Viscosity [mPas] /
Temperature [°C]
Application Characteristics Download
technical
data sheet (PDF)
Jowatherm-Reaktant® 601.00 PUR hot melt adhesive 34000 ± 6000 / 120 For bonding pretreated polyolefin foils, for instance for bonding sack bottoms of the AD-Plastik-SL series by Windmöller & Hölscher. Bonding of the extruded plastic foil and the bottom patch. After crosslinking, high heat resistance, good elasticity at low temperatures and good resistance to solvents. en fr
Jowatherm-Reaktant® 601.01 PUR hot melt adhesive 52500 ± 7500 / 140 For bonding pretreated polyolefin foils, for instance for bonding sack bottoms of the AD-Plastik-SL series by Windmöller & Hölscher. After crosslinking, high heat resistance, good elasticity at low temperatures and good resistance to solvents. de en
Jowatherm-Reaktant® 601.02 PUR hot melt adhesive 25000 ± 5000 / 140 For bonding pretreated polyolefin foils, for instance for bonding sack bottoms of the AD-Plastik-SL series by Windmöller & Hölscher. After crosslinking, high heat resistance, good elasticity at low temperatures and good resistance to solvents. de en fr
Jowatherm-Reaktant® 601.03 PUR hot melt adhesive 9800 ± 2200 / 140 For bonding pretreated polyolefin foils, for instance for bonding sack bottoms of the AD-Plastik-SL series by Windmöller & Hölscher. After crosslinking, high heat resistance, good elasticity at low temperatures and good resistance to solvents. de en fr
Jowatherm-Reaktant® 601.05 PUR hot melt adhesive 2500 ± 500 / 120 For bonding pretreated polyolefin foils, for instance for bonding sack bottoms of the AD-Plastik-SL series by Windmöller & Hölscher. After crosslinking, high heat resistance, good elasticity at low temperatures and good resistance to solvents.Long and high surface tack. de en fr
Jowatherm-Reaktant® 601.06 PUR hot melt adhesive 20000 ± 5000 / 120 For bonding pretreated polyolefin foils, for instance for bonding sack bottoms of the AD-Plastik-SL series by Windmöller & Hölscher. Medium open time and high initial adhesion. After crosslinking, very high strength of the bond, excellent heat resistance and very good resistance to low temperatures. de en fr

The products listed only represent a limited selection of the available product portfolio. Product availability might differ by region. The technical data, characteristics and field of application provided in the table outline the differences between the individual adhesives of the product portfolio. Our Application Technology Department and our Sales Representatives are on hand to provide advice and support you finding the best adhesive for your particular application.

Note: The information on this page is based on test results from our laboratories as well as on experience gained in the field, and does in no way constitute any guarantee of properties. Due to the wide range of different applications, substrates, and processing methods beyond our control, no liability may be derived from these indications nor from the information provided by our free technical advisory service. Customer trials under everyday conditions, testing for suitability at normal processing conditions, and appropriate fit-for-purpose testing are absolutely necessary. For the specifications as well as further information, please refer to the latest technical data sheets.