Uygulama Açıklaması

Motor bloğu montajı için yeni nesil PO hot-melt'ler

Motor bloğu yapıştırıcıları çok karmaşık talepleri karşılamalıdır. Uzun bir açıkta bekleme süresi, hızlı kohezyon oluşumu, yüksek ısı dayanımı ve mükemmel işlem güvenilirliği sağlamalıdırlar. Giderek artan bir seviyede, motor blokları termoplastik polyolefin (PO) hot-meltler ile birleştirilmektedir. Uzun yıllardan beri uygulama standardı olan standart Poliamid (PA) hot-meltlere göre, PO hot-melt yapıştırıcları, son derece daha iyi oksidasyon stabilitesine sahiptir. Bakım ve temizlik işleri veya hatalardan dolayı üretimin aksamasını büyük ölçüde azaltmaktadır ve proseslerin güvenilirliğini arttırmaktadır.

Ürün Bilgileri

-

Base Viscosity [mPas] /
Temperature [°C]
Processing
Temperature [°C]
Open Time [s] /
Temperature [°C] /
mm Bead
Application Download
technical
data sheet (PDF)
Jowat-Toptherm® 230.70 PO Hot Melt Adhesive 1520 ± 430 / 190 180 - 200 12 ± 3 / 190 / 2 Assembly bonding of sand cores in casting operations. de en fr
Jowat-Toptherm® 238.97 PO Hot Melt Adhesive 1100 ± 300 / 200 180 - 200 15 ± 2 / 190 / 2 Assembly bonding of sand cores in casting operations. de en fr

The products listed only represent a limited selection of the available product portfolio. Product availability might differ by region. The technical data, characteristics and field of application provided in the table outline the differences between the individual adhesives of the product portfolio. Our Application Technology Department and our Sales Representatives are on hand to provide advice and support you finding the best adhesive for your particular application.

Note: The information on this page is based on test results from our laboratories as well as on experience gained in the field, and does in no way constitute any guarantee of properties. Due to the wide range of different applications, substrates, and processing methods beyond our control, no liability may be derived from these indications nor from the information provided by our free technical advisory service. Customer trials under everyday conditions, testing for suitability at normal processing conditions, and appropriate fit-for-purpose testing are absolutely necessary. For the specifications as well as further information, please refer to the latest technical data sheets.

İndirmeler

PI_238.97.PDF