Uygulama Açıklaması

Akü üretimi

En yüksek gereksinimler sıklıkla detaylardadır. Örneğin, akü üretiminde yapıştırıcı karmaşık talepleri karşılamalıdır. Bu uygulama için özel olarak geliştirilmiş olan termoplastik PO hot melt yapıştırıcılar, iki bileşenli epoksilere göre büyük avantajlar sunmaktadır: asitlere karşı yüksek direnç, son derece verimli tek bileşenli işleme ve akünün polipropilen kasasına mükemmel bir yapışma. Buna ilaveten, uzun açıkta kalma süreleri ve hızlı yapışma sayesinde hızlı üretim süreçleriyle tam otomatik üretim süreçlerine ideal bir şekilde adapte olur. Diğer bir fayda ise, yapıştırıcının formülasyonuyla sağlanmaktadır: Benzer kimyasal içerikleri sayesinde, PO hot melt ve PP akü kasaları birlikte geri dönüştürülebilmektedir.

Ürün Bilgileri

-

Base Viscosity [mPas] /
Temperature [°C]
Processing
Temperature [°C]
Open Time [s] /
Temperature [°C] /
mm Bead
Application Download
technical
data sheet (PDF)
Jowat-Toptherm® 265.00 PO Hot Melt Adhesive 2700 ± 500 / 190 170 - 190 20 ± 2 For fixing battery elements inside plastic casings. de en fr

The products listed only represent a limited selection of the available product portfolio. Product availability might differ by region. The technical data, characteristics and field of application provided in the table outline the differences between the individual adhesives of the product portfolio. Our Application Technology Department and our Sales Representatives are on hand to provide advice and support you finding the best adhesive for your particular application.

Note: The information on this page is based on test results from our laboratories as well as on experience gained in the field, and does in no way constitute any guarantee of properties. Due to the wide range of different applications, substrates, and processing methods beyond our control, no liability may be derived from these indications nor from the information provided by our free technical advisory service. Customer trials under everyday conditions, testing for suitability at normal processing conditions, and appropriate fit-for-purpose testing are absolutely necessary. For the specifications as well as further information, please refer to the latest technical data sheets.

İndirmeler

PI_265.00.PDFAdhesive Portfolio for the Automotive Industry.PDF

Diğer Uygulamalar