Application Description

Her türlü taşıt imalatında tekstiller vazgeçilemez bir elemandır. Sonuç olarak Mobil-tek teknik tekstilin en büyük alanları arasındadır. Tek başına otomobil imalatında, tekstiller pek çok farlı uygulamaya sahiptir: koltuklar, tavanlar, kapı panelleri ve halılar. Her koltuk farklı materyallerden oluşan çeşitli katmanlara sahiptir - bir örtü kumaşı, döşeme için yapağı veya köpük katmanı. Buna ilaveten, koltuklar, ihtiyaca bağlı olarak sert ve yıpranmalara karşı dayanıklı teknik tekstiller ile donatılmaktadır. Örneğin otobüs ve tren koltukları, vandalizme karşı koruma için ince bez ve tekstil karışımıyla pekiştirilmektedir. Bu tekstiller, genellikle yüksek mukavemet ile karakterize olan polyesterden imal edilmektedir.
"Otomobil kabinlerinde farklı uygulamalar için tekstiller, rulolama ve paketlemeden önce doğrudan lamine edilmektedir. Lamine tekstiller için hızlı taşıma mukavemeti, sonraki üretim süreci için sıklıkla gereken bir özelliktir.

Bu nedenle, yüksek performanslı yapıştırıcılar, bu tekstil bileşenlerinin laminasyon işleminde temel bir rol oynamaktadır. Reaktif PUR hot melt’ler en yüksek talepleri karşılamaktadır: Bu yapıştırıcılar kısa üretim süreleri ve yüksek bileşen mukavemeti yanı sıra farklı materyallere geniş bir yapışma aralığı ve yüksek UV direnci sağlamaktadır. Tekstiller, sıklıkla ince ve yarı saydam olup yapıştırıcı noktalarının sarılaşması istenmeyen bir durumdur. Buna ilaveten, yapıştırıcılar, değişen iklim koşulları dayanıklılık testleri yanı sıra otomobil için geçerli sislenme ve VOC değerlerine ilişkin yüksek gereksinimleri karşılamalıdır.

Ürün Bilgileri

-

Base Viscosity [mPas] /
Temperature [°C]
Processing
Temperature [°C]
Application UV Marker Download
technical
data sheet (PDF)
Jowatherm-Reaktant® 630.20 PUR Hot Melt Adhesive 16000 / 100 100 - 120 laminating textiles to textiles and textile to foam. + de en fr
Jowatherm-Reaktant® 630.80 PUR Hot Melt Adhesive 8000 / 140 110 - 140 interior car panelling for instance hat racks, roof liners, door panelling etc.; compound materials + de en fr
Jowatherm-Reaktant® GROW 631.20 Biobased Hot Melt Adhesive 6000 ± 2000 / 140 110 - 140 Laminating adhesive for manufacturing substrates for interior car trims, e.g. percel shelves, headliners, door trim, etc. Also for the assembly if composite materials in the textile industry. de en fr
Jowatherm-Reaktant® MR 630.99 Monomer-Reduced PUR Hot Melt Adhesive 9000 ± 3000 / 110 100 - 130 For the assembly of composite materials in the textile industry. de en fr

The products listed only represent a limited selection of the available product portfolio. Product availability might differ by region. The technical data, characteristics and field of application provided in the table outline the differences between the individual adhesives of the product portfolio. Our Application Technology Department and our Sales Representatives are on hand to provide advice and support you finding the best adhesive for your particular application.

Note: The information on this page is based on test results from our laboratories as well as on experience gained in the field, and does in no way constitute any guarantee of properties. Due to the wide range of different applications, substrates, and processing methods beyond our control, no liability may be derived from these indications nor from the information provided by our free technical advisory service. Customer trials under everyday conditions, testing for suitability at normal processing conditions, and appropriate fit-for-purpose testing are absolutely necessary. For the specifications as well as further information, please refer to the latest technical data sheets.

İndirmeler

Adhesive Portfolio for the Textile Industry.PDF