Suche

been developed especially for applications which require a bond with a high resistance to ageing, a permanent resilience, as well as an elastic bondline. In [...] crosslinking in a reaction with water or humidity. They are free of formaldehyde, have a lower application amount compared to other systems due to a solids content [...] provides a wide range of 1K PU prepolymers with specific processing parameters, developed to meet different requirements: short processing times for a fast and

application, whether fingerjointing or laminating, has a unique set of requirements. Jowat supplies a product portfolio with one-component, moisture-curing [...] and a superior product quality compared to other systems such as condensation resins. They are completely free of formaldehyde and can be applied in a much [...] much lower grammage due to a solids content of 100 %. In addition, prepolymers cure within a few minutes at room temperature and provide an invisible bondline due

681.xx Adhesive Type: EN 15425–I–70–GP–0.3–w from 10 to 60 minutes, depending on adhesive type from 10 to 60 minutes, depending on adhesive type from 10 to 60 [...] processes. Due to a very good ratio between assembly times and pressing times, Jowapur ® 681.xx opens up completely new possibilities and facilitates a capacity increase [...] 60 minutes, depending on adhesive type de en fr The products listed only represent a limited selection of the available product portfolio. Product availability

It is worth changing to a new adhesive if you are seeking to improve technical, economic, or ecological conditions. Yet you should not introduce new adhesives [...] adhesives without sufficient planning. Different types of adhesives used together can interfere with each other, causing unwanted chemical reactions. To prevent any

successful use of Jowatherm-Reaktant® 608.00/01 PUR adhesive: PUR hot melt has a well-defined life span during which curing takes place. It is important that [...] before use and remove the liner / foil bag. Do not open more than one can at a time or stage the open adhesive cartridges at the work place. When the adhesive [...] schedule must include the necessary purging, corresponding to the adhesive type. Production planning must also specify proper maintenance and care of the adhesive

successful use of Jowatherm-Reaktant® 608.00/01 PUR adhesive: PUR hot melt has a well-defined life span during which curing takes place. It is important that [...] before use and remove the liner / foil bag. Do not open more than one can at a time or stage the open adhesive cartridges at the work place. When the adhesive [...] schedule must include the necessary purging, corresponding to the adhesive type. Production planning must also specify proper maintenance and care of the adhesive

successful use of Jowatherm-Reaktant® 608.00/01 PUR adhesive: PUR hot melt has a well-defined life span during which curing takes place. It is important that [...] before use and remove the liner / foil bag. Do not open more than one can at a time or stage the open adhesive cartridges at the work place. When the adhesive [...] schedule must include the necessary purging, corresponding to the adhesive type. Production planning must also specify proper maintenance and care of the adhesive

successful use of Jowatherm-Reaktant® 608.00/01 PUR adhesive: PUR hot melt has a well-defined life span during which curing takes place. It is important that [...] before use and remove the liner / foil bag. Do not open more than one can at a time or stage the open adhesive cartridges at the work place. When the adhesive [...] schedule must include the necessary purging, corresponding to the adhesive type. Production planning must also specify proper maintenance and care of the adhesive

be divided into three general groups: primary microplastics type A, primary microplastics type B, and secondary microplastics (cf. figure 1). The latter is [...] Primary microplastics type B are formed during use (e.g. tire abrasion or fibres released during the washing of synthetic clothing). Type A microplastics are e [...] millimetres in length. The release of type A microplastics can be intended, deliberately produced, or caused by accident. A major focus of the EU’s plastics strategy

foundation of a good night’s sleep and rest. Adhesives are a key component in a very wide range applications in the manufacture of all types of mattresses. [...] comfort and health, and therefore directly contributes to a good night’s sleep. Jowat-Toptherm ® 231.60 is a modern PO hot melt adhesive used in the assembly of pocket [...] adhesive impresses in this application with a log-term durability which has been verified many times in roller tests. Due to a careful selection of raw materials, the