Suche

teme GmbH. Before edgebanding, a hydrophobing agent - “sealingAgent“ - is applied to the edge of a wood-based panel, and this multiplies the water and steam

processes. For side edges and milled areas, the dispersion is applied twice. The first layer is applied to close the small pores and fibres on the cutting edge and [...] lamination guaranteed After a short drying time, a second layer of adhesive is applied before the foil is laminated. To ensure a uniform result, the application [...] to the series is the 1K PU dispersion Jowapur® 150.93. The adhesive can be applied by atomised spraying at low processing temperatures, making it a great choice

include the latest one-component polyurethane dispersion: Jowapur® 150.93 can be applied as a particularly fine mist and can be used at lower temperatures than with

established application methods. However, its full strength is revealed when applied by spraying in the 3D lamination of automotive parts such as dashboards, center

successfully made the change. The new Jowatherm-Reaktant ® MR 604.90 can be applied using all established wrapping units with the usual processing parameters

facilitating a proper venting. Requirements for roofing liners Roofing liners are applied manually and therefore ease of installation plays an important role. The textiles [...] combination consists of polyester fleece and different membranes. The adhesive is applied by slot nozzles or by so-called curtain coating methods with the lowest a

in the development of Jowacoll ® 114.60 was to ensure that the glue can be applied cleanly on fully automatic doweling machines with nozzle applicators.

lamination process of the filter components with activated charcoal, even when applying less adhesive. Lower grammages allow for a maximum of free active charcoal

or in a combination of continuous and stationary processes. The adhesive is applied with a roller coater onto the carrier material after which the laminate is [...] nozzle, for this special application it is essential that the adhesive be applied at the lowest possible temperature. The challenge with these adhesives is [...] bonded, to avoid offsetting the film. At the same time, the adhesive must be applied homogeneously to the bonding partner and irregularities in the substrate surface

granulate or block form as well as in cartridges, and can be processed and applied properly with the existing equipment.