In addition to having a specific purpose, some furniture components or furnishing elements, such as kitchen worktops or windowsills, also have to meet increased technological requirements. Firstly, these substrates are laminated with PVAc dispersions, PUR hot melts or other adhesive types. In a following post-forming process, the profiled carrier can then be covered seamlessly with a decor material to create a rounded edge on the worktop or the windowsill. Specially adapted dispersions or hot melt adhesives are the adhesives of choice for this procedure. The border between the edge and the coating on the underside is additionally sealed with a PUR hot melt adhesive to improve the moisture resistance of the product.
- postforming dispersion
- postforming hot melt adhesive
- Worktop sealing
|Base|| Viscosity [mPas] /|
| Softening Range|
| Density [g/cm³] /|
data sheet (PDF)
|Jowacoll® 128.70||PVAc Postforming Glue||11000 / 20||15||1,07 ± 0,05 / 20||de en fr|
postforming hot melt adhesive
The products listed only represent a limited selection of the available product portfolio. Product availability might differ by region. The technical data, characteristics and field of application provided in the table outline the differences between the individual adhesives of the product portfolio. Our Application Technology Department and our Sales Representatives are on hand to provide advice and support you finding the best adhesive for your particular application.
Note: The information on this page is based on test results from our laboratories as well as on experience gained in the field, and does in no way constitute any guarantee of properties. Due to the wide range of different applications, substrates, and processing methods beyond our control, no liability may be derived from these indications nor from the information provided by our free technical advisory service. Customer trials under everyday conditions, testing for suitability at normal processing conditions, and appropriate fit-for-purpose testing are necessary. For the specifications as well as further information, please refer to the latest technical data sheets.