Suche

with the Jowat ® flushing agents and cleaners. Especially in closed application systems it should be ensured that PUR hot melt adhesives and the Jowat ® flushing [...] system should be cleaned before downtimes. Jowat supplies a range of flushing agents and cleaners for that purpose. Jowat ® flushing agents push out the adhesive [...] melt, the roller pan should be emptied, flushed with the flushing agent Jowat ® Jowat ® 930.34/.74/.94 and then emptied again before weekends, holidays and other

the meaning of the GDPR is: Jowat SE Ernst-Hilker-Str. 10–14, 32758 Detmold, Germany, Phone: +49 (0) 5231 749-0, E-Mail: info@jowat.de Representatives of the [...] our website. If the processing of personal data is necessary and if there is no legal basis for such processing, we will obtain your consent. Personal data, [...] in line with the country-specific data protection regulations applicable to Jowat SE. The purpose of this Data Protection Statement is to inform you of the scope

Email: info @ jowat . de (for general enquiries) Data protection officer: Contact person for data protection for Jowat SE, Detmold and Jowat Klebstoffe GmbH [...] of utmost importance to Jowat SE. We should like to meet this requirement by providing the following information: Controller: Jowat SE Ernst-Hilker-Str. 10-14 [...] 87292-09 Fax: 05221 85496-99 E-Mail: datenschutz-jowat @ audatis . de Purpose and necessity: Contacting Jowat SE online. Legal basis: The data processing takes

Responsible: Jowat SE, Ernst-Hilker-Straße 10 – 14, 32758 Detmold, Germany, can be contacted by phone at: +49 (0) 5231 749-0, e-mail: info @ jowat . de . B. Data [...] Protection Officer: Jannik Wallbaum, phone: 05221 87292-09, e-mail: datenschutz-jowat @ audatis . de C. Information concerning the processing of data Purpose of [...] instruction, the latter especially within the framework of the regular auditing of JOWAT SE. In addition, the license number of the car belonging to the participant

Jowat SE Ernst-Hilker-Straße 10 - 14 D-32758 Detmold Phone: +49 (0) 5231 749-0 E-Mail: info@jowat.de Siège: Detmold Registre du Commerce: Lemgo HRB 8491 Turnover [...] Turnover ID No.: DE124607542 Comité de Direction: Klaus Kullmann Ralf Nitschke Dr. Christian Terfloth Président du Comité de Surveillance: Prof. Dr. Andreas Wiedemann

use with warm or cold water, using Jowat ® Cleaner Concentrate 192.40. Already dried adhesive can be dissolved using Jowat ® Thinner 401.30. Please also observe [...] below: 1. Fill the crosslinking agent Jowat ® 195.70/79 into a feeding container which is used exclusively for Jowat ® 195.70/79. 2. If the crosslinking agent [...] clean and free of adhesive residues. This is absolutely essential to ensure that no components enter the adhesive circuit. The inlet connector of the supply line

meet these requirements for 10 years and longer. By developing Jowat-Toptherm ® 232.30 , Jowat has established a general-purpose hot melt adhesive of the highest [...] highest standard for the assembly of pocket innerspring and Bonnell mattresses. Jowat-Toptherm ® 232.30 is characterised by an excellent performance on automated [...] or spraying 1. For adhesive application: high thermal stability in the melt no stringing accurate adhesive application 2. For the assembly and pressing process:

bonding surface with virtually no residues. Therefore, the formwork elements can be reused several times for casting concrete parts. Jowat-Toptherm ® 233.10 is applied [...] Description Modern thermoplastic hot melt adhesives based on polyolefin from Jowat bond wood-based materials as well as a wide variety of different plastics with [...] Controlled ambient conditions are not necessary for bonding. The adhesive Jowat-Toptherm ® 233.10 is optimised for this particular application. It is flexible

The precoating can be applied by an external supplier, in which case there is no more adhesive processing required during lamination. The continuously growing [...] surfaces with low surface tension. The new thermoplastic PO hot melt adhesive Jowat-Toptherm ® 238.20 is characterised by a long open time, high initial strength [...] oxidation and colour stability, low cleaning effort Application Description Jowat-Toptherm ® 238.20 is a precoating adhesive for flat lamination of textiles

and high temperatures, Jowat-Toptherm ® 851.20 flexes its muscles and ensures that your packaging is held securely! Product Features Jowat-Toptherm ® 851.20 For [...] all hot melt adhesives reach their limits. At a certain point, the adhesive no longer manages to dissipate the heat quickly enough, to solidify, and thus to [...] and sauces, packaging tiles, or in pasteurization processes, are mastered by Jowat-Toptherm ® 851.20 . This high performance polyolefin (PO) hot melt impresses