Suche

quickly understood our requirements and suggested several solutions in no time. A few days later, the ideal adhesive for our requirements was already in our warehouse [...] the sealing of the bags. A bonding solution is needed which meets the requirements mentioned above and which is compatible with the machines. Reliable bonding [...] always a very exciting challenge—not least due to the continually evolving requirements,” says Johann Quiring of Jowat’s Solution Partner Support. “They provide

for any lining also depends on the individual installation situation—the requirements for a butterfly roof differ from those for a pavilion roof, for example [...] applied over a large area when using a laminate, coating a textile membrane requires an “open” application technique. Jowat-Toptherm® 230.45 is an adhesive designed [...] polyurethane adhesives that can also reliably hold up to the demanding requirements placed on the laminate—with short cycle times, a wide adhesion spectrum

of a second, the ends of the strong paper are subjected to high tension and require precise bonding. One of the last steps in the wrapping process, is to fold [...] le for the furniture manufacturer—clean and reliable processes are key requirements. Hedlunda contacted Jowat for assistance to tackle this challenge: “Jowat [...] for the project at Jowat. “The high heat resistance which is usually a requirement, was not specifically a condition in this case. However, it is generally

accelerating business in Eastern Europe at that time was subject to certain requirements which favored a location in the eastern part of Germany. In addition, the [...] promoters and solvent-based adhesives, can be met in accordance with customer requirements.

healthier living spaces, the need to reduce the risk of infection—all these requirements, and many more besides, mean that the demand for Class H14 to U17 HEPA and [...] increases its surface—and thus its filter capacity. This production step requires not just the utmost care, but also an outstanding bonding solution that guarantees [...] formulations are not subject to hazard labelling and the resulting training requirements that will soon come into effect. Another benefit provided by these new

One example of this is the touch-operated console of the future, which will require a coating that maintains the transparent quality of the surface. Other components [...] provided a monomer-reduced—and therefore not subject to hazard labelling requirements—PUR hot melt for coating vehicle interior design. “This adhesive can be [...] all-rounder when it comes to coating components,” and one that fulfils all the requirements for modern production. It encapsulates perfectly Jowat’s ability to provide

developed by Jowat, for example, is tailored to optimally meet the special requirements in load-bearing timber construction. The one-component, moisture-reactive [...] between assembly time and pressing time, which considerably reduces the time requirement for processes in this area. In addition, the Jowat portfolio supplies adhesive [...] to moisture resistance and fire protection. “We are familiar with the requirements that apply to the numerous regulations and certifications, and we always

apartments, and even technical doors for commercial use or heightened security requirements. One of the most popular models in PORTA’s portfolio is CONCEPT, whose modern [...] that polyurethane-based adhesives (PUR) were the best choice to meet the requirements for the bonding and coating of the material. PORTA had never used a PUR [...] showed that this was the only type of adhesive that could meet all of the requirements and expectations relating to the bonding.” PORTA followed the recommendation

important that the end product stays together securely and that all static requirements in the supporting timber are thus met.” Jowapur® 681.xx is characterized [...] partnership. We have always found the right solution together for every requirement we have had so far.” Read other interesting articles in our customer magazine

Jowat supplies high-quality PUR hot melt adhesives developed for industrial requirements. The heart of an electric vehicle is often a high-voltage battery, which—in [...] drive rather than the dashboard electronics. The manufacturing and bonding requirements for the compartment cover of these batteries is demanding, David Puls emphasizes