Recherche | Jowat Colles

Press photos

Kartuschen (jpg | 2,832,991.0 m) PUR bottles PUR-Flaschen (jpg | 4,395,403.0 m) Hot melt adhesive in cartridge form Patronen (jpg | 2,685,892.0 m) Solvent-based adhesive

/fr-CA/profile/press/press-photos/

Jowat AG at the Hannover Messe 2014. - Practical Demonstration: Jowat casting compound in low-pressure injection moulding

Expansionstechnologie, Jowat AG gives a live demonstration of processing a hot melt casting compound. The result of this practical demo is a give-away which [...] a wide range of industrial adhesives. A special polyolefin-based assembly hot melt for cores bonding is also introduced. The exceptionally high heat resistance

https://www.jowat.com/fr-CA/detail-de-la-salle-de-presse/jowat-ag-at-the-hannover-messe-2014-practical-demonstration-jowat-casting-compound-in-low-pressu/

Innovations for the Ligna 2013: Attractive adhesives – powerful, efficient, ecological!

ktant® 603.80, a clear PUR hot melt adhesive used above all in lamination applications with high-gloss foils. This PUR hot melt adhesive exhibits a wide spectrum [...] For the sector surface lamination, PO hot melts are used, for instance the new Jowat-Toptherm® 236.30. The performance spectrum of this adhesive covers for

https://www.jowat.com/fr-CA/detail-de-la-salle-de-presse/innovations-for-the-ligna-2013-attractive-adhesives-powerful-efficient-ecological/

Jowat bonds foam for sweet dreams: New Jowat adhesive for mattress manufacture

compound. Contrary to the normal and expected behaviour of thermoplastic hot melts, the new adhesive provides at the same time excellent wetting properties

https://www.jowat.com/fr-CA/detail-de-la-salle-de-presse/jowat-bonds-foam-for-sweet-dreams-new-jowat-adhesive-for-mattress-manufacture/

New formula: Thermoplastic adhesives for high-quality lamination of wood-based substrates – for general use with all common laminating machines using in- or offline application.

herm® are free of formaldehyde and in comparison to dispersion adhesives hot melt formulations do not contain water. Any possible swelling of the wood-based [...] compound strength, is achieved. In contrast to the conventional thermoplastic EVA systems, these new formulations based on polyolefins allow to create adhesive

https://www.jowat.com/fr-CA/detail-de-la-salle-de-presse/new-formula-thermoplastic-adhesives-for-high-quality-lamination-of-wood-based-substrates-for-gene/

Jowat AG – ZOW 2013: Intelligent bonding systems 3.0 Industrial adhesives with functional added values

colourless, transparent, and crosslinking hot melt of the product group of Jowatherm-Reaktant® is used. This hot melt also offers a wide adhesion spectrum, m [...] the Jowacoll® dispersions, the Jowat-Toptherm® and the Jowatherm-Reaktant® hot melt adhesives. Added functional product values like reduced flammability, degree [...] es for furniture surfaces create new challenges for the performance of a hot melt adhesive. One of the marks of quality is the surface hardness of a coating

https://www.jowat.com/fr-CA/detail-de-la-salle-de-presse/jowat-ag-zow-2013-intelligent-bonding-systems-30-industrial-adhesives-with-functional-added-valu/

Filters in top shape: Jowatherm® and Jowat-Hightherm® for pleating and frame bonding

cracks in the bondline and the filter pockets remain tightly sealed. The hot melt adhesives Jowatherm® and Jowat-Hightherm® are highly flexible and reliable

https://www.jowat.com/fr-CA/detail-de-la-salle-de-presse/filters-in-top-shape-jowathermr-and-jowat-highthermr-for-pleating-and-frame-bonding/

Techtextil 2013: Strong adhesives for lamination of NFPP and PP in car interiors - Reliable bonding for highly difficult surfaces by using reactive hot melt adhesives

for vehicle interiors using reactive hot melt adhesives In laminating processes for car interiors with reactive hot melt adhesives based on polyolefin (POR) [...] materials - either pre-cut or on reels – with polyamide (PA) or polyester hot melt adhesives (PES) has been used in automotive interiors for quite some time [...] by using press lamination, to the respective base materials. The precoated hot melt adhesive is in these cases reactivated by heat and forms a very strong bond

https://www.jowat.com/fr-CA/detail-de-la-salle-de-presse/techtextil-2013-strong-adhesives-for-lamination-of-nfpp-and-pp-in-car-interiors-reliable-bonding/

Techtextil 2013: New thermoplastic and reactive adhesives for more process reliability in the manufacture of technical textiles.

tant: New reactive hot melt developments for the manufacture of cleaning textiles, PVC tablecloths and sanding papers: Reactive hot melt adhesives are the top [...] polyolefin (PO) or polyurethane (PUR), whether thermoplastic or reactive: The new hot melt adhesives from Jowat AG have been developed especially for the production [...] top performers among the hot melts. They are used when manufacturing conditions or the processing environments for technical textiles are very challenging.

https://www.jowat.com/fr-CA/detail-de-la-salle-de-presse/techtextil-2013-new-thermoplastic-and-reactive-adhesives-for-more-process-reliability-in-the-manufa/

Jowat AG presents an innovative adhesive portfolio at the Techtextil 2013 - Efficiency is the key target of development: adhesives for textile compounds and applications in vehicle interiors.

Efficiency is the target which Jowat AG has in focus when developing new hot melt adhesives for the textile and automotive industries. The results are powerful [...] or surgery drapes. Adapted to the individual areas of application, Jowat hot melt adhesives always provide characteristics that improve the efficiency in the [...] NFPP surface and also of the TPO foil. The thermoplastic polyolefin (PO) hot melt has a high heat resistance. An important criterion since the laminated pieces

https://www.jowat.com/fr-CA/detail-de-la-salle-de-presse/jowat-ag-presents-an-innovative-adhesive-portfolio-at-the-techtextil-2013-efficiency-is-the-key-ta/

Suche