Suche

hot melts achieve a superior bond with good long-term resistance, and have short pressing times, a high green strength and bond strength, as well as a high heat [...] widely used in mattress manufacturing, even materials that are difficult to bond, e.g. latex, visco-, or gel foam. In addition to focusing on the products mentioned [...] , and close customer contact. Under the anniversary motto “Our word is our bond – since 1919” Jowat will also be exhibiting at the 60th interzum trade fair

high efficiency and cleanliness during processing and facilitate recyclable bonds according to the German packaging law. In their formulation, only resins made [...] applications. The wide range of adhesion facilitates a reliable bonding of hard-to-bond surfaces. And their high flexibility at low temperatures is favourable in d [...] September in hall 2, booth 2-326, under the anniversary banner “Our word is our bond – since 1919”.

and ensures a superior bond – with a lower total application amount compared to the one-sided application. The result: Permanent bonds for quality mattresses [...] mattresses have to be stored for several hours after pressing until the necessary bond strength has built up. To reduce the risk of mould formation, they also have [...] adhesive, reactive hot melts provide excellent adhesion to even difficult to bond materials such as latex or gel foams, which may also have different properties

aesthetic standards such as a zero joint appearance. A high heat resistance, high bond strength coupled with optimized application amounts, reduced stringing and a [...] melt adhesive can be processed with automatic edgebanding machines and can bond different edgebanding materials such as ABS, PP, PET, PVC, melamine or real

materials for exterior application, e.g. Tricoya®, as well as other difficult to bond modified wood-based products. This adhesive has properties known so far only [...] moisture and heat. Two-component Jowat® SE-Polymer, an adhesive system which bonds effectively when mechanical fastening is too expensive or when the bonding

demonstrated especially in gluing applications with surfaces that are difficult to bond. The elastic joint allows a tolerance compensation between parts with high power

the bonding partners facilitates a significantly increased resistance of the bond against heat (over 120 °C) as well as water and steam. Handling the then new [...] physical build-up of strength which results in the initial strength of the bond. This is followed by a chemical crosslinking in which the adhesive reacts with [...] on the substrate surface, thus improving adhesion and making it possible to bond even difficult materials, for instance aluminium edgebands. PUR hot melt adhesives

bondline, such as high moisture resistance and bond strength in dry heat, facilitate an extremely strong and permanent bond that can withstand even heavy mechanical [...] However, due to the organic ingredients, such as oil and fats, it is difficult to bond. Therefore, an adhesive was needed to facilitate a high compound strength despite

melt adhesive is in these cases reactivated by heat and forms a very strong bond between decor material and substrate. Lately, the automotive industry has started [...] requirements of the automotive industry concerning temperature resistance and bond strength. The challenge: Lamination of components for vehicle interiors using [...] necessary. The development of the new POR hot melt adhesive now allows to bond without pretreatment of the PP components with low surface tension, while still

ensure an optimum adhesion of adhesives on materials which are difficult to bond and require a surface treatment. These adhesion promoters are crucial for high [...] well as for the aging resistance and consequently for the durability of the bond. The modern primer portfolio ranges from new toluene-, THF-, NMP- and NEP-free