Suche

The Board of Directors of Jowat SE stresses that the installation of the photovoltaic systems is further step towards the successful implementation of the United [...] lity of bonding is an integral objective of the Jowat principles. Resource conservation is of crucial importance in that regard and to this end Jowat focuses [...] focuses on the adhesive itself as well as on the bonding process. The Green Adhesives series comprises Jowat adhesives which meet different sustainability aspects

which verifies the human-ecological safety of textiles. Thereby, it facilitates the choice of e.g. suitable adhesives for products manufactured in accordance with [...] classes based on the intended use of the textile. The more intensive the skin contact of a product and the more sensitive the skin of the corresponding target group [...] therefore the limits which must be complied with. All tested Jowat adhesives can be used for the manufacture of textiles in the category with the highest requirements

years, the adhesives manufacturer from Detmold presents the Jowat Adhesives Research Award to honour outstanding solutions and approaches in the field of adhesive [...] the earliest possible identification of error causes; the adjustment of process parameters; and a predictable maintenance of relevant plant technology. The jury [...] by the Chair of Materials and Joining Technology at the University of Paderborn under Professor Dr Gerson Meschut and the Leiden Institute of Advanced Computer

customers around the world, and Jowat’s Biobased GROW adhesives are an innovative development in reducing the consumption of fossil fuel,” said Brian Sufak, [...] applaud Jowat Corporation for earning the USDA Certified Biobased Product label,” said Kate Lewis, USDA BioPreferred Program. “Products from Jowat Corporation [...] Regional Sales Manager at Jowat Corporation. “We are proud to be the first adhesive manufacturer to earn the USDA Certified Biobased Product label.” The USDA

properties. As well as strong and long-lasting adhesion, it also has to provide a soft adhesive joint. “Jowat’s service convinced us.” During its process optimisation [...] Makina. “And Jowat has a very good reputation as an adhesive manufacturer.” Ata Burak Yucel is a Territory Sales Manager at the Turkish subsidiary, Jowat Atasoy. [...] provided a sample of the adhesive for test runs. The first trials were successful, leading to the customer’s decision to work with the Jowat product. “It was

a time or stage the open adhesive cartridges at the work place. When the adhesive is exposed to humidity for an extended period of time, premature crosslinking [...] layer of the adhesive. This will produce an invisible fine skin in the exposed areas which cannot be melted again. Compromised PUR hot melt adhesive will lead [...] purging, corresponding to the adhesive type. Production planning must also specify proper maintenance and care of the adhesive application unit. ATTENTION When

a time or stage the open adhesive cartridges at the work place. When the adhesive is exposed to humidity for an extended period of time, premature crosslinking [...] layer of the adhesive. This will produce an invisible fine skin in the exposed areas which cannot be melted again. Compromised PUR hot melt adhesive will lead [...] purging, corresponding to the adhesive type. Production planning must also specify proper maintenance and care of the adhesive application unit. ATTENTION When

a time or stage the open adhesive cartridges at the work place. When the adhesive is exposed to humidity for an extended period of time, premature crosslinking [...] layer of the adhesive. This will produce an invisible fine skin in the exposed areas which cannot be melted again. Compromised PUR hot melt adhesive will lead [...] purging, corresponding to the adhesive type. Production planning must also specify proper maintenance and care of the adhesive application unit. ATTENTION When

a time or stage the open adhesive cartridges at the work place. When the adhesive is exposed to humidity for an extended period of time, premature crosslinking [...] layer of the adhesive. This will produce an invisible fine skin in the exposed areas which cannot be melted again. Compromised PUR hot melt adhesive will lead [...] purging, corresponding to the adhesive type. Production planning must also specify proper maintenance and care of the adhesive application unit. ATTENTION When