Suche

and ensures a superior bond – with a lower total application amount compared to the one-sided application. The result: Permanent bonds for quality mattresses [...] mattresses have to be stored for several hours after pressing until the necessary bond strength has built up. To reduce the risk of mould formation, they also have [...] adhesive, reactive hot melts provide excellent adhesion to even difficult to bond materials such as latex or gel foams, which may also have different properties

the bonding partners facilitates a significantly increased resistance of the bond against heat (over 120 °C) as well as water and steam. Handling the then new [...] physical build-up of strength which results in the initial strength of the bond. This is followed by a chemical crosslinking in which the adhesive reacts with [...] on the substrate surface, thus improving adhesion and making it possible to bond even difficult materials, for instance aluminium edgebands. PUR hot melt adhesives

bondline, such as high moisture resistance and bond strength in dry heat, facilitate an extremely strong and permanent bond that can withstand even heavy mechanical [...] However, due to the organic ingredients, such as oil and fats, it is difficult to bond. Therefore, an adhesive was needed to facilitate a high compound strength despite

excessive adhesive can be cleaned with water. Reactive PU glues provide a stronger bond, but are also harder to clean. Special glues are available for bonding outdoor

forces or high temperatures. The thermoplastic adhesives facilitate a high bond strength even with a small application surface, long durability and superior [...] compartment also requires superior levels of temperature resistance: the filter bond may be exposed to temperatures from 80 to 130°C. Lamination of activated charcoal [...] Thermoplastic PO and reactive PUR hot melt adhesives facilitate flat surface bonds of activated charcoal media with a high permeability of the filter medium.

are all-rounders and very versatile. Therefore, no refitting is required to bond different materials and the fast build-up of strength facilitates faster process [...] risk of any movement in the bondline. Only hot melts provide the necessary bond strength to ensure that the mattress lays flat after unpacking; dispersions

industry as well as meet the legal requirements. And facilitate a reliable bond.” The article is published in the magazine "exakt 10.2019" in German language

recessed areas for the subsequent application of adhesive. The closing flaps will bond perfectly on the coated surface, even in short process cycles and with little

effort. The Jowapur® prepolymers are reinforced with fibres that increase the bond strength and prevent the assemblies from sliding apart in the manufacturing

in terms of comfort; quite the opposite, in fact, since the soft adhesive bonds and minimal tacky adhesive surface residue left behind by PUR prevent any