Suche

also referred to as MDI) in the order of 2 %. Since 2002, products containing 0.1 % or more of free monomeric isocyanate must be labelled with the GHS hazard [...] statements). Adhesives with a free monomeric isocyanate content of less than 0.1 % are not subject to hazard labelling and therefore play a major role in fa

ilością kancerogennego monomeru izocyjanianu (monomer reduced- MR). Ilość poniżej 0,1% wolnego monomeru izocyjanianu czyni go bezpiecznym dla osób zatrudnionych w

Jowatherm-Reaktant® MR liegt der enthaltene Anteil an monomeren Diisocyanaten unter 0,1 Gew.-%. Somit muss laut aktueller EU-Verordnung (EU1272/2008 sowie der dazugehörigen

reduced monomer content form the Jowatherm-Reaktant® MR series contain less than 0.1 % monomeric diisocyanate by weight. Therefore, they are not subject to hazard [...] series for some time now. The monomer-reduced (MR) adhesives contain less than 0.1% monomeric MDI. Therefore, according to the current EU regulation, there is

requirements, products with a free monomeric diisocyanate content of no more than 0.1 percent by weight can have a hazard-free labelling. Jowat has been supplying

thus future-proof adhesive can be evaluated from various points of view (Figure 1): What is the raw material basis of the adhesive's formulation? What impact does [...] adhesives have a very low content of monomeric diisocyanate (MDI) of less than 0.1 % and therefore do not require hazard labeling. In addition, from August 24 [...] health are also relevant. The article is published in the magazine "adhesion 1/2023". You can download the original article down below.

hazard labeling requirement if the monomeric MDI concentration is less than 0.1 percent. Sustainable adhesive solutions Monomer-reduced—and therefore hazar

isocianato monomérico livre (diisocianato de 4-4’-difenilmetano (MDI) inferior a 0,1% e, por isso, não são rotulados como nocivos à saúde. Além disso, deve-se considerar