Suche

facts and figures about the House of Technology: The building covers an area of 2,500 square meters, is constructed with 850 cubic meters of wood, and boasts a [...] melt adhesives have a low content of monomeric diisocyanate (MDI) of less than 0.1 percent and are therefore not subject to hazard labeling. It is also important

ße 10 – 14, 32758 Detmold, Germany, can be contacted by phone at: +49 (0) 5231 749-0, e-mail: info @ jowat . de . B. Data Protection Officer: Jannik Wallbaum [...] the legal duties of the data controller arising from section 6(2) of DGUV provision 1, section 8(2) of the German Act on Occupational Health and Safety (Arbei [...] information duties: Retention period of personal data: The data will be erased 2 years after the date on which it was first collected. Rights of the data subject:

from pulp production residues. However, directly obtained tree resins (Figure 2) or terpene resins (Figure 3), which various citrus fruits, are also an option [...] adhesives have a very low content of monomeric diisocyanate (MDI) of less than 0.1 % and therefore do not require hazard labeling. In addition, from August 24

diisocyanate – in short MDI) of approx. 2 %. Since 2012, products containing isocyanate with a free monomer isocyanate content of 0.1 % or higher must be labelled with [...] information (H and P statements). Adhesives with an MDI content of less than 0.1 % are not subject to hazard labelling requirements. Jowat has successfully

industry and in interior finishing. The carpenter’s glues are supplied in handy 0.5 kg bottles with a reclosable screw cap and have a minimum durability of 24 [...] Jowacoll ® 103.70 (pH-neutral D3 glue), Jowacoll ® 104.20 (general-purpose glue in D2 quality) and Jowacoll ® 119.60 (lacquer glue for bonding difficult surfaces)

począwszy od beczek 180kg poprzez hoboki o wadze ok. 22kg do puszek o pojemności ok. 2 kg oraz kartuszy 310ml. Wszystkie pojemniki są hermetycznie zamknięte w atmosferze [...] ilością kancerogennego monomeru izocyjanianu (monomer reduced- MR). Ilość poniżej 0,1% wolnego monomeru izocyjanianu czyni go bezpiecznym dla osób zatrudnionych

iisocyanate, MDI) in the order of approx. 2 %. Since 2012, products with a free monomeric isocyanate content of 0.1 % and more must be labelled with the GHS [...] statements). Adhesives with a free monomeric isocyanate content of less than 0.1 % are not subject to hazard labelling requirements. Downloads Application Our

e diisocyanate – also referred to as MDI) in the order of 2 %. Since 2002, products containing 0.1 % or more of free monomeric isocyanate must be labelled with [...] statements). Adhesives with a free monomeric isocyanate content of less than 0.1 % are not subject to hazard labelling and therefore play a major role in f

according to the standard have to be resistant against solvents (DIN ISO 2836, 6.2.2, 6.2.3) and alkali (DIN ISO 2836; 5.3). If special inks or Pantone inks are used [...] Depending on the type of dispersion, the size of the plastic particles can vary from 0.03 μm to 5 μm. They are so small that they are not visible to the naked eye. [...] applications, with particle diameters between approx. 200 and 800 nm (1 nm = 0.001 μm) that deliver a very clear and transparent adhesive film. The technical

Carefully remove as much as possible of the PUR hot melt remnants from the walls. 2. Fill the suitable Jowat ® flushing agent (depending on the adhesive type) into [...] fr Jowat ® 930.74 Flushing Agent red, granulate / blocks 20000 / 120 100 - 140 0,95 / 20 80 Flushing of melting units and hoses. Contains a reaction inhibitor [...] Jowat ® 930.84 Flushing Agent red, granulate 25000 / 100 approx. 100, max. 150 0,93 / 20 80 Flushing of melting units and hoses. Contains a rection inhibitor