Suche

facilitate a safe handling of the filter elements. The filter media are then bonded into frames made from wood, metal or plastic, which makes them easier to install

process, nozzles apply dots or beads of hot adhesive onto the surfaces to be bonded. This often has an undesired side effect, where the applied adhesive is pulling [...] increase adhesive consumption and soil machine parts. A short string beneath the bonded flap is not as bad as one which is visible. Make sure the adhesive is applied

must therefore meet equally high standards in terms of process reliability, bond quality and cost-effectiveness as a conventional fossil-based adhesive. The

suitable NEP-free and VOC-reduced primers from our portfolio, it can be used to bond over 95 % of PVC- and PMMA-based decor foils established on the market. The

adhesive but on ensuring that it does not affect the ability to recycle the bonded product. “Recycling compatibility” is therefore the more appropriate term. [...] low-density hot melt adhesives with a wide range of adhesion facilitate high bond strengths with minimal consumption. Coupled with high thermal stability, it

meet the requirements for durability class D4 according to EN 204. If those bonded products are intended for exterior use, they must be protected by an adequate

central role. The phasing out of solvents in lacquered surfaces that had to be bonded was only the beginning. For several years, manufacturers have, for instance [...] industry as well as meet the legal requirements. And facilitate a reliable bond.” The article is published in the magazine "exakt 10.2019" in German language

the bonding partners facilitates a significantly increased resistance of the bond against heat (over 120 °C) as well as water and steam. Handling the then new [...] physical build-up of strength which results in the initial strength of the bond. This is followed by a chemical crosslinking in which the adhesive reacts with [...] on the substrate surface, thus improving adhesion and making it possible to bond even difficult materials, for instance aluminium edgebands. PUR hot melt adhesives

effort. The Jowapur® prepolymers are reinforced with fibres that increase the bond strength and prevent the assemblies from sliding apart in the manufacturing

several individually laminated parts consisting of diverse material combinations bonded together with different adhesive systems. For instance, armrests with integrated [...] Textile laminates used for headliners, seats and pillar trim are generally bonded with PUR hot melt adhesives. The high-performance adhesives are characterised [...] superior appearance of the car interior. The finished textile composites are then bonded to the carrier part with either dispersions or hot melt adhesives, depending